di pirlotto61 » 02/11/06 19:36
Step 1
------
Turn on your computer, enter CMOS setup by pressing the delete (del) key
during the Boot Sequence, and set the first boot device to be A: (floppy)
Save settings and exit by pressing F10.
Step 2
------
Shut down the system, and then insert eSupport BIOS Flash Upgrade Disk.
Step 3
------
Reboot the system.
Step 4
------
The program will perform the flash automatically. When asked to continue or
quit, press any key to continue. Do NOT reset or turn off the computer during
the flash process or your BIOS may be damaged.
Step 5
------
When the flash is finished, you will be prompted to quit the program or
restart the system. Choose to restart the system. (Make sure that the flash
disk has been removed).
Step 6
------
Your system has now been flashed with the new eSupport BIOS upgrade. You
should see the new BIOS version displayed on the screen during bootup. Press
the Delete key to setup your BIOS again if necessary.