Condividi:        

Consiglio su format, cambio SO e compatibilità hardware

Se il modem non funziona, hai problemi con la scheda video o non sai che processore scegliere entra qui!!

Moderatori: m.paolo, Caffey

Consiglio su format, cambio SO e compatibilità hardware

Postdi stankament » 29/12/02 07:00

:evil: :evil: voglio riformattare tutto! e passare dal millenium all'XP..
dove li trovo i driver aggiornati per le perif..etc...

accetto qlsiasi konsiglio :lol:

devo far sì ke mi giri senza rompere le :eeh: coral draw!

la ram kmq mi sembra ddr...l'originale mi pare 128...+ 1a da 256 aggiunta da me :oops:

se la skeda madre è quella definita system booard in un libretto tutto in inglese dal quale nn decifro "na mazza!" oioi......però ho skarikato qua da pc facile un sof. ke pare dica:

Computer SystemManufacturer : CdcPointSpa
Version : 1234567890
Unique ID : 00000000-00000000-00000000-00000000

System Chassis
Manufacturer : Uknown Chassis Manufacture
Case Type : Desktop
Can be locked : No
Version : Version 1.00
Serial Number : 1234567890
Asset Tag : 0123ABC

System Mainboard
Manufacturer : Hsing Tech Enterprise
MP Support : No
BIOS ID : 62-0425-001437-00101111-071595-SiS730S

Memory Controller
Error Detection Method : 32-bit ECC
Error Correction Capability : 1-bit
Supported/Current Memory Interleave : 1-way / 1-way
Number of Memory Slots : 4
Maximum Installable Memory : 512MB
Maximum Module Size : 128MB
Supported STD/FPM/(B)EDO Speeds : 70ns, 60ns
Supported Memory Types : STD, FPM, EDO, Parity, ECC, SIMM
Supported Memory Voltages : 3.3V

Physical/BIOS Memory Banks
ROW-0 (RASL-0 RASL-10) : 128MB DIMM SDRAM single-bank
ROW-1 (RASL-0 RASL-11) : 256MB DIMM SDRAM single-bank
ROW-2 : Empty
ROW-3 : Empty

System Chipset
Model : Silicon Integrated Systems (SiS) SiS730 CPU to PCI Bridge
Bus(es) : ISA AGP USB SMBus/i2c
Front Side Bus Speed : 2x 100MHz (200MHz data rate)
Max FSB Speed / Max Memory Speed : 2x 100MHz / 1x 100MHz
In Order Queue Depth : 3 req(s)

Logical/Chipset Memory Banks
Bank 0 Setting : 128MB SDRAM 8-1-1-1R 6-1-1-1W 3-3-3CL
Bank 1 Setting : 256MB SDRAM 8-1-1-1R 6-1-1-1W 3-3-3CL
Shared Memory : 16MB
Power Down Mode : No
Fixed Hole Present : No

Memory Module(s)
Memory Module 1 : Hyundai Electronics 71V16635AT8-H B90F5126 128MB 8x(16Mx8) SDRAM PC133U-333-542 (CL3 upto 133MHz) (CL2 upto 100MHz)
Memory Module 2 : R01K47FM27 RM56S281TA-13AC 256MB 8x(32Mx8) SDRAM PC133U-333-542 (CL3 upto 133MHz)

Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 32.0°C / 89.6°F
CPU Temperature : 38.0°C / 100.4°F
Power / Aux Temperature : 50.0°C / 122.0°F

Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 4530rpm

Voltage Sensor(s)
CPU Core Voltage : 1.62V
Aux Voltage : 2.51V
+3.3V Voltage : 3.39V
+5V Voltage : 5.08V
+12V Voltage : 12.04V
-12V Voltage : 0.64V
-5V Voltage : -5.36V
Standby Voltage : 5.03V
Battery Voltage : 3.46V

AGP Bus
Version : 2.00
Current Data Transfer Rate : 4x
Side Band Enabled : Yes
Fast-Writes Enabled : No
Fast-Writes Support : Yes
Aperture Size : 64MB

LPC Hub Controller 1
Model : Silicon Integrated Systems (SiS) SiS85C503/5513 PCI to ISA Bridge (LPC Bridge)
ACPI PM Enabled : Yes
Random Number Generator Enabled : No
Speed : 7MHz

USB Controller 1
Model : Silicon Integrated Systems (SiS) SiS5597/8 Universal Serial Bus Controller
Version : 1.00
OHCI Interface : Yes
Channels : 3
Legacy Emulation Enabled : No

USB Controller 2
Model : Silicon Integrated Systems (SiS) SiS5597/8 Universal Serial Bus Controller
Version : 1.00
OHCI Interface : Yes
Channels : 3
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : SiS 5595 Internal SMBus

Expansion Slot(s)
PCI1 (1h) : PCI 32-bit 3.3V Shared PME FullLength Available (Silicon Integrated Systems (SiS) SiS85C503/5513 PCI to ISA Bridge (LPC Bridge))
PCI2 (2h) : PCI 32-bit 3.3V Shared PME FullLength Available (Silicon Integrated Systems (SiS) 5591/2 Virtual PCI to PCI Bridge)
PCI3 (3h) : PCI 32-bit 3.3V Shared PME FullLength

Port Connector(s)
USB - Def : SSA SCSI - Mini Centronics / DB25 pin male

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 2544 : System/Video shared memory greatly reduces performance. Use external video card.
Warning 2545 : Large memory modules should be Registered/Buffered.
Tip 2524 : AGP Aperture size should be less or equal to system memory.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.[/b][/u][/u]
grazie per quanto già mi avete detto.......
allora riassumendo: se posso mettere l'Athlon... e la formatazione x installare XP....driver e tutti i consigli ke "ve vengono!" ;)



gra gragragraaaaaa

stankament
stankament
Newbie
 
Post: 4
Iscritto il: 25/12/02 01:33

Sponsor
 

Postdi dado » 29/12/02 13:09

I driver per win XP per le tue periferiche li trovi semplicemente sui siti dei produttori di queste. Ad es se tu hai una stampante Epson SC 580, i driver li trovi sul sito della Epson, sezione supporto/driver, modello Epson SC 580, sistema operativo Win Xp. Se le periferiche non sono così vecchie, i driver per XP dovrebbero essere già compresi nel cd che ti viene dato nella confezione della periferica. O ancora più semplicemente, molti driver di periferiche varie sono già compresi nel cd di windows xp. A meno che tu non abbia periferiche nuovissime e quindi, comprensibilmente, non ancora compresi nel cd di xp.

House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi

Postdi Nicola » 29/12/02 14:01

ROW-0 (RASL-0 RASL-10) : 128MB DIMM SDRAM single-bank
ROW-1 (RASL-0 RASL-11) : 256MB DIMM SDRAM single-bank

384 MB di DIMM .
RAM fisica disponibile = 384 - 16 (ram scheda video integrata) = 368 MB di memoria fisica disponibile.

Come RAM ci siamo.. ma che CPU hai?

Ciao
Nicola
Nicola
Utente Senior
 
Post: 7381
Iscritto il: 08/02/02 01:00

Postdi Nicola » 29/12/02 14:26

da un msg privato:

stankament ha scritto:come ke cpu? nn l'avevo messa? forse nell'altro topik..mmmmmmmm 8)

kmq AMD Durom 800

le info sulla skeda madre c sono tutte no?
e tutto il resto ke kiedevo? :undecided:

cia e arigràààà :)

stankament

Come detto in privato.. le tue componenti hardware vanno bene per XP ;)..
Installalo pure .. :P

Ciao
Nicola
Nicola
Utente Senior
 
Post: 7381
Iscritto il: 08/02/02 01:00

Postdi dado » 29/12/02 18:38

Riporto da un topic chiuso:

stankament ha scritto:sisi... sò sikuro stavolta.... qua ce deve esse tutto!!!!

Computer System
Manufacturer : CdcPointSpa
Version : 1234567890
Unique ID : 00000000-00000000-00000000-00000000

System Chassis
Manufacturer : Uknown Chassis Manufacture
Case Type : Desktop
Can be locked : No
Version : Version 1.00
Serial Number : 1234567890
Asset Tag : 0123ABC

System Mainboard
Manufacturer : Hsing Tech Enterprise
MP Support : No
BIOS ID : 62-0425-001437-00101111-071595-SiS730S

Memory Controller
Error Detection Method : 32-bit ECC
Error Correction Capability : 1-bit
Supported/Current Memory Interleave : 1-way / 1-way
Number of Memory Slots : 4
Maximum Installable Memory : 512MB
Maximum Module Size : 128MB
Supported STD/FPM/(B)EDO Speeds : 70ns, 60ns
Supported Memory Types : STD, FPM, EDO, Parity, ECC, SIMM
Supported Memory Voltages : 3.3V

Physical/BIOS Memory Banks
ROW-0 (RASL-0 RASL-10) : 128MB DIMM SDRAM single-bank
ROW-1 (RASL-0 RASL-11) : 256MB DIMM SDRAM single-bank
ROW-2 : Empty
ROW-3 : Empty

System Chipset
Model : Silicon Integrated Systems (SiS) SiS730 CPU to PCI Bridge
Bus(es) : ISA AGP USB SMBus/i2c
Front Side Bus Speed : 2x 100MHz (200MHz data rate)
Max FSB Speed / Max Memory Speed : 2x 100MHz / 1x 100MHz
In Order Queue Depth : 3 req(s)

Logical/Chipset Memory Banks
Bank 0 Setting : 128MB SDRAM 8-1-1-1R 6-1-1-1W 3-3-3CL
Bank 1 Setting : 256MB SDRAM 8-1-1-1R 6-1-1-1W 3-3-3CL
Shared Memory : 16MB
Power Down Mode : No
Fixed Hole Present : No

Memory Module(s)
Memory Module 1 : Hyundai Electronics 71V16635AT8-H B90F5126 128MB 8x(16Mx8) SDRAM PC133U-333-542 (CL3 upto 133MHz) (CL2 upto 100MHz)
Memory Module 2 : R01K47FM27 RM56S281TA-13AC 256MB 8x(32Mx8) SDRAM PC133U-333-542 (CL3 upto 133MHz)

Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 34.0°C / 93.2°F
CPU Temperature : 41.0°C / 105.8°F
Power / Aux Temperature : 39.0°C / 102.2°F

Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 4530rpm

Voltage Sensor(s)
CPU Core Voltage : 1.62V
Aux Voltage : 2.51V
+3.3V Voltage : 3.39V
+5V Voltage : 5.05V
+12V Voltage : 12.11V
-12V Voltage : 0.64V
-5V Voltage : -5.41V
Standby Voltage : 5.03V
Battery Voltage : 3.46V

AGP Bus
Version : 2.00
Current Data Transfer Rate : 4x
Side Band Enabled : Yes
Fast-Writes Enabled : No
Fast-Writes Support : Yes
Aperture Size : 64MB

LPC Hub Controller 1
Model : Silicon Integrated Systems (SiS) SiS85C503/5513 PCI to ISA Bridge (LPC Bridge)
ACPI PM Enabled : Yes
Random Number Generator Enabled : No
Speed : 7MHz

USB Controller 1
Model : Silicon Integrated Systems (SiS) SiS5597/8 Universal Serial Bus Controller
Version : 1.00
OHCI Interface : Yes
Channels : 3
Legacy Emulation Enabled : No

USB Controller 2
Model : Silicon Integrated Systems (SiS) SiS5597/8 Universal Serial Bus Controller
Version : 1.00
OHCI Interface : Yes
Channels : 3
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : SiS 5595 Internal SMBus

Expansion Slot(s)
PCI1 (1h) : PCI 32-bit 3.3V Shared PME FullLength Available (Silicon Integrated Systems (SiS) SiS85C503/5513 PCI to ISA Bridge (LPC Bridge))
PCI2 (2h) : PCI 32-bit 3.3V Shared PME FullLength Available (Silicon Integrated Systems (SiS) 5591/2 Virtual PCI to PCI Bridge)
PCI3 (3h) : PCI 32-bit 3.3V Shared PME FullLength

Port Connector(s)
USB - Def : SSA SCSI - Mini Centronics / DB25 pin male

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 2544 : System/Video shared memory greatly reduces performance. Use external video card.
Warning 2545 : Large memory modules should be Registered/Buffered.
Tip 2524 : AGP Aperture size should be less or equal to system memory.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

mo nn ve ringrazio + anticipatamente...aspetto i risultati!!!

ciao dalla mente + STANKAAAAAAAAAAAAAA


PS: ho cambiato il titolo del topic in uno più 'comprensibile' dall'esterno! :D

House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi

Postdi dado » 30/12/02 00:08

stankament ha scritto:allora mi kiedavate della mabo.. vi ho mandato tutto...
posso o nn posso mettere un athlon 1700?


Stankament... continua qua sotto!!!! Non far nuovo topic! ;)

House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi

Postdi kyara » 30/12/02 13:17

Te ne vai sul sito della mobo e controlli le caratteristiche (se non hai il libretto di istruzioni) e vedi se puoi installare sto benedetto xp amd.
kyara
Utente Senior
 
Post: 923
Iscritto il: 07/08/01 01:00
Località: web

Postdi stankament » 30/12/02 13:21

dado ha scritto:
stankament ha scritto:allora mi kiedavate della mabo.. vi ho mandato tutto...
posso o nn posso mettere un athlon 1700?


Stankament... continua qua sotto!!!! Non far nuovo topic! ;)


grazie dado....... mo sò bene come funziona il forum... :D
avevo già allusi alla mia lentezza nel "comprendonio" :lol:

però adesso continuate voi qua sotto illuminando il buio nel quale continuo ad arrancare :evil: 8)

intanto grà davvero dado... il tuo lavoro lo fai OK ;)
_________________________________________
nn lo sò.......... però nn c'azzekko mai!! e i fatti mi cosanooo :D
stankament
Newbie
 
Post: 4
Iscritto il: 25/12/02 01:33

Postdi xaba » 06/01/03 01:42

sei troppo forte stancament ;)
xaba
Utente Junior
 
Post: 99
Iscritto il: 21/02/02 17:28
Località: craven road


Torna a Assistenza Hardware


Topic correlati a "Consiglio su format, cambio SO e compatibilità hardware":

Consiglio Tv 50"
Autore: lukarello7
Forum: Forum off-topic
Risposte: 3

Chi c’è in linea

Visitano il forum: Nessuno e 30 ospiti