Condividi:        

informazione nuovo per linux

Per tutti i tuoi problemi Linux entra qui e risolvili!

Moderatori: Anthony47, gunter, zendune

informazione nuovo per linux

Postdi sergioregalia » 02/10/03 18:15

Ciao ragazzi sono nuovo io ho bisogno di un consiglio con tutti i passi per come fare ad istallare il modem fastrate 100 usb ho i driver ma non so proprio da dove iniziare e come fare mi potete dare una mano?
grazie Sergio :?: :!:
sergioregalia
Utente Junior
 
Post: 35
Iscritto il: 02/10/03 18:10

Sponsor
 

Postdi Luva » 02/10/03 18:24

hai provato a fare una ricerca nel forum o con google?
magari qualcuno che ha avuto il tuo problema ha specificato come risolverlo....
ciao
Linux Slackware 10.x - Kernel 2.6.10-gX
- - - [ http://b4yzone.altervista.org ] - - -
Luva
Utente Senior
 
Post: 397
Iscritto il: 15/07/02 19:53
Località: Pavia

risposta

Postdi sergioregalia » 02/10/03 18:32

Ciao vedi il mio problema è come devo fare per installare il driver
ciao
sergioregalia
Utente Junior
 
Post: 35
Iscritto il: 02/10/03 18:10

Postdi rayden » 02/10/03 18:41

bè di solito nei file dei driver ci deve essere un file README o uno INSTALL che ti spiegano come fare
Le uniche limitazioni che abbiamo sono quelle che ci poniamo da soli...
http://www.lightingandservices.com
http://www.lightingandservices.com/phoenix
rayden
Utente Senior
 
Post: 881
Iscritto il: 07/08/01 01:00

risposta

Postdi sergioregalia » 02/10/03 18:46

tu hai ragione ma il mio problema è che non so proprio da dove cominciare e ho gia reinstallato 4 volte linux perchè l'ho incasinato io ho bisogno di una guida su come compilare ed installare i driver del modem
ciao
sergioregalia
Utente Junior
 
Post: 35
Iscritto il: 02/10/03 18:10

Postdi aladdin » 02/10/03 20:49

Per il mio modem e' bastato scompattare il file con i driver e leggere il README. Seguendo la procedura descritta e avendo i sorgenti del kernel in /usr/src/linux ha creato i moduli per utilizzare il modem.
In pratica, credo che tu abbia solo bisogno di saper leggere... poi non so.
aladdin
Utente Junior
 
Post: 38
Iscritto il: 11/12/02 14:11

Postdi sergioregalia » 02/10/03 20:54

vedi io so leggere ma non ho mai compilato e non so da dove partire e quali comandi usare
sergioregalia
Utente Junior
 
Post: 35
Iscritto il: 02/10/03 18:10

Postdi aladdin » 02/10/03 21:11

Be' crea una cartella nella tua home-directory e copia il file dei driver

# mkdir drivers_modem
# cp /dir-dove-stanno-i-drivers/nome-file.zip ~/drivers_modem

Anche se mi sembra strano che sia un file zip. Questo mi coglie impreparato sul metodo di scompattazione... :-? Forse con gzip :-? Boh... usa KDE!

Scompattati i file, entra nella cartella che ha creato e con un bell'editor di testo leggi il README che 10-a-1 sta nella cartella.
# vi README
(vi=masochismo, ma lo trovi su qualsiasi sistema linux. E' una certezza)

A questo punto devi leggere. Ti verra' chiesto di specificare qualche configurazione particolare, qualche path, ma alla fine dovresti avere sempre qualcosa tipo:

# ./configure
# make

Poi non no... tutto puo' essere...
Smanettaci un po' sopra! Tanto danni non ne puoi fare. Tutt'al piu'... FORMATTI PER LA QUINTA VOLTA
:diavolo:
aladdin
Utente Junior
 
Post: 38
Iscritto il: 11/12/02 14:11

Postdi sergioregalia » 02/10/03 21:17

grazie riprovo un ultima cosa quei comandi #....... dove devo metterli scusa l'ignoranza lo faccio con l'editor?
sergioregalia
Utente Junior
 
Post: 35
Iscritto il: 02/10/03 18:10

Postdi Nicola » 03/10/03 09:34

sergioregalia ha scritto:grazie riprovo un ultima cosa quei comandi #....... dove devo metterli scusa l'ignoranza lo faccio con l'editor?


fallo da una shell root ovviamente senza # prima (che significa shell root)
Nicola
Nicola
Utente Senior
 
Post: 7381
Iscritto il: 08/02/02 01:00

Postdi Nicola » 03/10/03 09:35

P.S.: dimenticavo per scompattare gli zip basta unzip nomefile.zip

Se non è installato installalo. Se hai mandrake apri rpmdrake da root e cercalo, quindi selezionalo. Ti chiedera` i CDs
Nicola
Nicola
Utente Senior
 
Post: 7381
Iscritto il: 08/02/02 01:00

Postdi sergioregalia » 03/10/03 11:24

nicola se io ti do il file del redame tu mi puoi dare i passi che devo fare e i comandi per farlo io non so proprio come fare non sono esperto sono 5 giorni che ho linux te lo scrivo qui
The software for the UNICORN ADSL PCI card consists of two loadable drivers,
the unicorn_atm.o and unicorn_pci.o. The unicorn driver is a standard Linux
ATM driver, that performs segmentation and reassembly (SAR) and flow control.
The unicorn_pci driver contains the ADSL modem software and hardware related
functions. It has been tested with the Linux 2.4.x kernels. Note that to use
PPPoE, PPPoA or RFC2684 protocols, the kernel may need to be patched.

COMPILATION:

To compile the drivers, unzip and untar the file. In the unicorn directory you
will find the two subdirectories unicorn_atm and unicorn_bus.
You may compile the drivers based on the include files in the kernel source
or standard kernel include files. Set the variable KERNELDIR in the Makefile's
to point to your kernel sources if the first option in chosen.
If you choose the latter, you may need to copy the contents of the kernel
source "include/net" directory into "/usr/include/net/".
Go into these subdirectories and do a "make" and a "make install".
If the compile option "USE_HW_TIMER" is set, the performance is increased,
but the CPU load increased.
Use the same compiler as you use when compiling the linux kernel. The driver has
been tested using gcc-2.96, gcc-2.95.2, gcc-2.91.66 and gcc 3.0.3.


INSTALLATION:

To start the ADSL software, do a "modprobe unicorn_pci". Check in the syslog that
the drivers are started OK. The ADSL line should come up automatically. The status
can also be checked using the "proc" interface (/proc/net/atm/UNICORN\:0".
SHOWTIME in the log or in the status means that ADSL connction is up and ATM cells
may be transmitted and received.
Depending on your network setup, you will need additional software as with any other
ADSL ATM card. For bridged ethernet (RFC2684), the br2684.o module and brctl is needed.
For PPPoE, any pppoe client over the bridged interface (nas0) should work
(Roaring Penguin pppoe client has been tested).
The scripts directory contains some example startup scripts.

Bridged (RFC2684) and PPP over Ethernet:
Depending on your kernel, you may need to patch the kernel and enable the option
"RFC1483/2684 Bridged protcols" under "Networking options". Also ATM support needs
to be enabled.
Also the user space daemon "brctl" is needed. Instructions on how to apply the
patch and the brctl and patch sources can be found at http://www.zoftware.org/adsl-pppoe.

PPP over ATM:
For PPP over ATM, the module pppoatm.o is needed, together with the pppd plugin
pppoatm.so and a version of pppd that supports plugins.
Currently version ppp-2.4.0b2 supports PPPoATM plugins. A patched version ready for
PPPoATM can be found at http://www.sourceforge.net/.

PPPoATM specific pppd options:
llc-encaps: use LLC encapsulation for PPPoATM
vc-encaps: use VC multiplexing for PPPoATM (default)
ti prego dimmi tutti i passi che devo fare grazie anche i comandi che devo usare ciao
sergioregalia
Utente Junior
 
Post: 35
Iscritto il: 02/10/03 18:10

Postdi sergioregalia » 03/10/03 19:40

perchè nessuno mi aiuta ? :?: :!: :(
sergioregalia
Utente Junior
 
Post: 35
Iscritto il: 02/10/03 18:10


Torna a Software Linux


Topic correlati a "informazione nuovo per linux":

Nuovo notebook
Autore: Tony2
Forum: Consigli per gli acquisti
Risposte: 4

Chi c’è in linea

Visitano il forum: Nessuno e 13 ospiti