Condividi:        

problema spegnimento xp AIUTO

Hai problemi con i file Zip, vuoi formattare l'HD, non sai come funziona FireFox? O magari ti serve proprio quel programmino di cui non ricordi il nome! Ecco il forum dove poter risolvere i tuoi problemi.

Moderatori: Dylan666, hydra, gahan

problema spegnimento xp AIUTO

Postdi sanchez » 22/01/03 10:25

quando cerco di spegnere il pc invece di spegnersi autometicamente come faceva prima di resettare il mio pc, si riavvia!come mai?le ho provate davvero tutte, rundull32(una cosa del genere), e deselezionato "riavvia automaticamente" in sistema->avanzate->avvia.... ma niente anzi quando deseleziona tale opzione quando spengo il pc mi esce una schermata blu con su scritte alcune cose.....come devo fare???nn ce la faccio più ogni volta devo tenere premuto il pulsante di spegnimento 4 secondi per poter spegnere il pc!!!ed ogni volta quando avvio il computer mi entra in byos autometicamente oppure fa giustamente lo scan disk!!!VI PREGO AIUTATEMI!!!!!
sanchez
Newbie
 
Post: 3
Iscritto il: 22/01/03 10:20

Sponsor
 

Postdi frabas » 22/01/03 10:58

Dimmi che pacchetti hai installato ultimamente. Mi ricordo che a me faceva una cosa simile quando ho installato Nero e Easy cd creator 5.0. Insieme fanno casino.

Ciao
frabas
Utente Junior
 
Post: 53
Iscritto il: 13/01/03 10:27
Località: Turin

ho tutti e due i sftware che hai detto tu!

Postdi sanchez » 22/01/03 14:09

diciamo che da quando ho resettato il cpu poi tutto in una volta ho messo i programmi avevo e subito dopo spegnendo nn mi è andato lo spegnimento!!!che dici di provare a levare easy cd creator???altro nn so dirti!!!le ho provate tutti .....porca miseria.......grazie cmq
sanchez
Newbie
 
Post: 3
Iscritto il: 22/01/03 10:20

Postdi frabas » 22/01/03 14:57

Ma sai che non ho capito una mazza?!?

Hai parlato di Easy cd Creator 5.0 Platinum? RIMUOVILO subito e poi vediamo.
In breve, elenca tutti i programmi che hai installato, cosi, per fare un primo screening del problema.

Ciao
Fra
frabas
Utente Junior
 
Post: 53
Iscritto il: 13/01/03 10:27
Località: Turin

rimosso easy ma niente!!!

Postdi sanchez » 23/01/03 10:22

nulla da fare ho tolto easy!!!ma niente!!!uffa.....elenco tutti i software ma poi come fai a capire quale è quello che crea qualche conflitto???
sanchez
Newbie
 
Post: 3
Iscritto il: 22/01/03 10:20

Postdi frabas » 23/01/03 12:02

Hai visto se i log di Windows presentano degli errori? Vai a consultare l'event viewer. Intanto fatti un bel backup dei doc. e della posta (pst), potresti ripristinare una configurazione precedente e sicuramente funzionante, Xp ha questo tool molto utile. La soluzione estrema consiste nel rifare la macchina e poi fatti un bel ghost su partizione fat non appena hai installato Xp, ripeto questa è una soluzione drastica.

ciao
frabas
Utente Junior
 
Post: 53
Iscritto il: 13/01/03 10:27
Località: Turin

Postdi Triumph Of Steel » 23/01/03 12:18

Ma il solito metodo dell'APM in Risparmio energetico no?
Avatar utente
Triumph Of Steel
Moderatore
 
Post: 7852
Iscritto il: 22/08/01 01:00

Postdi francy » 23/01/03 14:09

Scusate ma il pc si riavvia automaticamente quando si presenta qualche conflitto o problema sia esso HW o SW se ci riporti gli errori della schermata BLU forse possiamo aiutarti... ;)
francy
Utente Senior
 
Post: 464
Iscritto il: 03/12/02 11:11
Località: Udine

Postdi Nicola » 23/01/03 14:48

Triumph Of Steel ha scritto:Ma il solito metodo dell'APM in Risparmio energetico no?

Se ha ECCD5 credo proprio che sia colpa di questo. Mi pare che ci sia una patch. frabas apri Windows Update per controllare. ;)

Ciao
Nicola
Nicola
Utente Senior
 
Post: 7381
Iscritto il: 08/02/02 01:00

Postdi frabas » 24/01/03 08:53

Nicola ma io non ho un laboratorio per provare, deve farlo il nostro amico Sanchez.

Poi, come fate mettere in evidenza una frase tipo:

Nicola ha scritto:

Frase da commentare.....

Non riesco, esiste qualche "gabola"?

Grazie, ciao.
frabas
Utente Junior
 
Post: 53
Iscritto il: 13/01/03 10:27
Località: Turin

Postdi dado » 24/01/03 12:14

X far la quotazione, o usi la funzione QUOTE di fianco al messaggio che vuoi quotare, oppure scrivi in un nuovo messaggio:
[ quote="tizio" ]
citazione
[ /quote ]

NOTA: le parentesi quadre vanno attaccate al resto del codice (cioè a quote e alle virgolette all'inizio e alla barra e a quote alla fine). Io le ho staccate x farti vedere il codice... ciao

House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi

Postdi frabas » 24/01/03 15:55

Ci provo dado!
Grazie

[ quote="DADO" ]
X far la quotazione, o usi la funzione QUOTE di fianco al messaggio che vuoi quotare
[ /quote ]


Ragazzi, estratto fresco fresco da Technet!

CD Recording Software Will Cause Windows to Become Unstable" Error Message When You Start WindowsPSS ID Number: Q315345

Article Last Modified on 06-11-2002


--------------------------------------------------------------------------------
The information in this article applies to:

Microsoft Windows XP Professional
Microsoft Windows XP Home Edition

--------------------------------------------------------------------------------
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
Q256986 Description of the Microsoft Windows Registry


Symptoms
When you start Microsoft Windows XP, you may receive an error message similar to the following:

Devices or Applications disabled

CD Recording software will cause Windows to become unstable. Windows has prevented these drivers from loading. Click here for more details.
When you view the details, the following information is displayed:
A CD Recording driver is installed that may cause stability problems including shutting down and problems using a CD/DVD drive.
The driver will be disabled.

The drivers may be installed by Easy CD Creator or Windows Media Player or Real Jukebox.
You might not be able to record CDs until you obtain compatible drivers.

http://www.roxio.com
http://www.microsoft.com
http://www.switchboard.real.com



Cause
This behavior can occur in the following situation:

You have an early version of Easy CD Creator installed on your Windows XP-based computer.

-or-


You uninstall an early version of Easy CD Creator before you upgrade your computer to Windows XP.


This issue occurs because the drivers for some early versions of Easy CD Creator are incompatible with Windows XP. When you uninstall Easy CD Creator, some registry settings and files may remain on the computer.



Resolution
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

To resolve this issue, manually remove registry settings and files that are related to the Easy CD Creator program. To do this, follow these steps.

Create a Windows XP restore point to undo any changes that you make to the operating system. To do this, follow these steps:


Quit all programs that are running.


Click Start, and then click Help and Support.


Under Pick a task, click Undo changes to your computer with System Restore.


Click Create a restore point, and then click Next.


In the Restore point description box, type prior to Easy CD Creator removal, and then click Create.


Click Close, and then close the Help and Support Center dialog box.


If the Easy CD Creator program is installed, uninstall it. To do this, follow these steps:


Click Start, and then click Control Panel.


Click Switch to Category View if Control Panel is not already in Category View.


Click Add or Remove Programs, click the Easy CD Creator program in the Currently installed programs list, and then click Remove.


Follow the steps to completely remove the program, and then click Close to quit the Add or Remove Programs dialog box.


Click Start, and then click Search.


Click All files and folders.


In the All or part of the file name box, type cdr*.sys.


In the Look in list, click Local Hard Drives (C:), and then click Search.


In the right pane of the Search Results dialog box, rename the following files if they are listed:
Cdr4_2K.sys
Cdralw2k.sys
To do this, right-click a file, and then click Rename on the shortcut menu that appears. Rename the .sys file extension to .old, and then press ENTER.


When you are finished renaming the files, close the Search Results dialog box.


Click Start, and then click Run.


In the Open box, type regedit, and then click OK.


Navigate to the following registry subkey:


HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
In the right pane of the Registry Editor window, right-click the UpperFilters value (if it is present), and then click Delete on the shortcut menu that appears. Click Yes on the Confirm Value Delete message that appears.


In the right pane of the Registry Editor window, right-click the LowerFilters value (if it is present), and then click Delete on the shortcut menu that appears. Click Yes on the "Confirm Value Delete" message that appears.


Navigate to the following registry subkey:


HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Cdr4_2K
On the Edit menu, click Delete, and then click Yes on the "Confirm Key Delete" message that appears.


Navigate to the following registry subkey:


HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Cdralw2k
On the Edit menu, click Delete, and then click Yes on the "Confirm Key Delete" message that appears.


Navigate to the following registry subkey:


HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Cdudf
On the Edit menu, click Delete, and then click Yes on the Confirm Key Delete message that appears.


Navigate to the following registry subkey:


HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UdfReadr
On the Edit menu, click Delete, and then click Yes on the Confirm Key Delete message that appears.


On the File menu, click Exit.


Restart the computer.





More Information
For additional information about the Easy CD Creator program, see the following Roxio Web site:

http://www.roxio.com
The third-party products discussed in this article are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.


The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Microsoft in no way guarantees the accuracy of this third-party contact information.


Additional query words:

Keywords: ocsso
Issue Type: kbprb
Technology: kbWinXPHome kbWinXPPro kbWinXPProSearch kbWinXPHomeSearch kbWinXPSearch
frabas
Utente Junior
 
Post: 53
Iscritto il: 13/01/03 10:27
Località: Turin

Postdi frabas » 24/01/03 16:36

Ci provo dado!
Grazie


Avevo l'html disabled! Che ciuccio che sono.
frabas
Utente Junior
 
Post: 53
Iscritto il: 13/01/03 10:27
Località: Turin

Postdi dado » 24/01/03 19:32

frabas ha scritto:
Ci provo dado!
Grazie


Avevo l'html disabled! Che ciuccio che sono.


Così va meglio.... BENE! :D
X la parcella, il mio CC è 123456 alla banca di Paperopoli... :P

House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi


Torna a Software Windows


Topic correlati a "problema spegnimento xp AIUTO":

aiuto windows 10
Autore: mod360
Forum: Software Windows
Risposte: 1

Chi c’è in linea

Visitano il forum: Nessuno e 68 ospiti