Condividi:        

Si è verificato un errore wuauclt

Hai problemi con i file Zip, vuoi formattare l'HD, non sai come funziona FireFox? O magari ti serve proprio quel programmino di cui non ricordi il nome! Ecco il forum dove poter risolvere i tuoi problemi.

Moderatori: Dylan666, hydra, gahan

Re: Si è verificato un errore wuauclt

Postdi quizface » 15/03/09 16:45

Prova anche a cambiare il wuauclt1.exe
Se non siete sicuri di quello che scrivete, non scrivete niente, nessuno vi obbliga ed eviterete di confondere chi gia' e' confuso. Ciao..ciao
Avatar utente
quizface
Utente Senior
 
Post: 15071
Iscritto il: 03/10/04 00:36

Sponsor
 

Re: Si è verificato un errore wuauclt

Postdi Carlodam » 15/03/09 18:08

quizface ha scritto:Prova anche a cambiare il wuauclt1.exe

Ho cambiato anche il wuauclt1.exe ma senza successo.

Cmq ho provato nuovamente a fare il windows Update senza riuscirci (errore 0x80248011 dopo aver iniziato la ricerca successiva alla scelta "rapido").
Ho provato anche a farlo in "modalità provvisoria con rete" da "start". Mi ha dato il seguente errore: 0x8007043c.
Sono concorde com Micky68 nel credere che sia il problema sia dovuto ad un aggiornamento.....
Hai suggerimenti?
Carlodam
Utente Junior
 
Post: 25
Iscritto il: 08/03/09 13:07

Re: Si è verificato un errore wuauclt

Postdi quizface » 15/03/09 19:26

per il secondo errore:
0x8007043C Means: ERROR_NOT_SAFEBOOT_SERVICE.
Translation: You need a service which is not available in safe mode (il servizio non si puo' avere in modalita' provvisoria)
Quindi questo errore e' da non considerare.
Concentriamoci sul primo errore.
Prova questi fix:
What causes Error 0x80248011

# Internet Cache Issue

# Corruption in the Data Store


Resolution Suggestion One:

# To resolve this error, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

Start Internet Explorer.
On the Tools menu, click Internet Options.
Click the General tab.
In the Temporary Internet files section, click Delete Cookies.
In the Delete Cookies box, click OK.
Click Delete Files.
Click to select the Delete all offline content check box in the Delete Files dialog box, and then click OK.
In the History section, click Clear History.
Click Yes, and then click OK.

------------------------------

Resolution Suggestion Two:

# Delete the datastore and allow it to rebuild itself:

First stop the Automatic Update Service:

Click Start
Choose Run
In the Run box, type services.msc
Click OK
Right-click the Automatic Updates Service
Click Stop

After Stopping the Service please rename the folder c:\Windows\SoftwareDistribution

Open Windows Explorer
Navigate to the Windows folder
Click on the + next to the Windows folder
Navigate to SoftwareDistribution folder
Right Click on the SoftwareDistribution folder
Select rename from the Menu
Rename the folder to SoftwareDistribution.old and click Enter

Now restart the Automatic Update Service

Click Start
Choose Run
In the Run box, type services.msc
Click OK
Right-click the Automatic Updates Service
Click Start

Starting the service will take a moment...

--------------------------------------------


I have also come across this "fix" in the newsgroups:

Hi,

To fix this error 0x80248011. try the following in the command prompt. The steps to follow are given below.

Click on Start -> run -> type command: cmd and command prompt will appear. After you are in command prompt try the following commands.

net stop wuauserv
cd /d C:\windows\SoftwareDistribution
rd /s DataStore
net start wuauserv

Now try the service again.

Prova uno alla volta questi fix che ho trovato sul web.
Se non siete sicuri di quello che scrivete, non scrivete niente, nessuno vi obbliga ed eviterete di confondere chi gia' e' confuso. Ciao..ciao
Avatar utente
quizface
Utente Senior
 
Post: 15071
Iscritto il: 03/10/04 00:36

Re: Si è verificato un errore wuauclt

Postdi Carlodam » 15/03/09 22:50

quizface ha scritto:per il secondo errore:
0x8007043C Means: ERROR_NOT_SAFEBOOT_SERVICE.
Translation: You need a service which is not available in safe mode (il servizio non si puo' avere in modalita' provvisoria)
Quindi questo errore e' da non considerare.
Concentriamoci sul primo errore.
Prova questi fix:
What causes Error 0x80248011

# Internet Cache Issue

# Corruption in the Data Store


Resolution Suggestion One:

# To resolve this error, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

Start Internet Explorer.
On the Tools menu, click Internet Options.
Click the General tab.
In the Temporary Internet files section, click Delete Cookies.
In the Delete Cookies box, click OK.
Click Delete Files.
Click to select the Delete all offline content check box in the Delete Files dialog box, and then click OK.
In the History section, click Clear History.
Click Yes, and then click OK.

------------------------------

Resolution Suggestion Two:

# Delete the datastore and allow it to rebuild itself:

First stop the Automatic Update Service:

Click Start
Choose Run
In the Run box, type services.msc
Click OK
Right-click the Automatic Updates Service
Click Stop

After Stopping the Service please rename the folder c:\Windows\SoftwareDistribution

Open Windows Explorer
Navigate to the Windows folder
Click on the + next to the Windows folder
Navigate to SoftwareDistribution folder
Right Click on the SoftwareDistribution folder
Select rename from the Menu
Rename the folder to SoftwareDistribution.old and click Enter

Now restart the Automatic Update Service

Click Start
Choose Run
In the Run box, type services.msc
Click OK
Right-click the Automatic Updates Service
Click Start

Starting the service will take a moment...

--------------------------------------------


I have also come across this "fix" in the newsgroups:

Hi,

To fix this error 0x80248011. try the following in the command prompt. The steps to follow are given below.

Click on Start -> run -> type command: cmd and command prompt will appear. After you are in command prompt try the following commands.

net stop wuauserv
cd /d C:\windows\SoftwareDistribution
rd /s DataStore
net start wuauserv

Now try the service again.

Prova uno alla volta questi fix che ho trovato sul web.

quizface ha scritto:per il secondo errore:
0x8007043C Means: ERROR_NOT_SAFEBOOT_SERVICE.
Translation: You need a service which is not available in safe mode (il servizio non si puo' avere in modalita' provvisoria)
Quindi questo errore e' da non considerare.
Concentriamoci sul primo errore.
Prova questi fix:
What causes Error 0x80248011

# Internet Cache Issue

# Corruption in the Data Store


Resolution Suggestion One:

# To resolve this error, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

Start Internet Explorer.
On the Tools menu, click Internet Options.
Click the General tab.
In the Temporary Internet files section, click Delete Cookies.
In the Delete Cookies box, click OK.
Click Delete Files.
Click to select the Delete all offline content check box in the Delete Files dialog box, and then click OK.
In the History section, click Clear History.
Click Yes, and then click OK.

------------------------------

Resolution Suggestion Two:

# Delete the datastore and allow it to rebuild itself:

First stop the Automatic Update Service:

Click Start
Choose Run
In the Run box, type services.msc
Click OK
Right-click the Automatic Updates Service
Click Stop

After Stopping the Service please rename the folder c:\Windows\SoftwareDistribution

Open Windows Explorer
Navigate to the Windows folder
Click on the + next to the Windows folder
Navigate to SoftwareDistribution folder
Right Click on the SoftwareDistribution folder
Select rename from the Menu
Rename the folder to SoftwareDistribution.old and click Enter

Now restart the Automatic Update Service

Click Start
Choose Run
In the Run box, type services.msc
Click OK
Right-click the Automatic Updates Service
Click Start

Starting the service will take a moment...

--------------------------------------------


I have also come across this "fix" in the newsgroups:

Hi,

To fix this error 0x80248011. try the following in the command prompt. The steps to follow are given below.

Click on Start -> run -> type command: cmd and command prompt will appear. After you are in command prompt try the following commands.

net stop wuauserv
cd /d C:\windows\SoftwareDistribution
rd /s DataStore
net start wuauserv

Now try the service again.

Prova uno alla volta questi fix che ho trovato sul web.


Ho provato (non senza difficoltà) i tre suggerimenti, ma senza successo la finestra di errore si ripresenta (Si è verificato un errore in wuauclt.exe. L'applicazione verrà chiusa).
Comunque ho notato che se arresto il servizio "aggiornamenti automatici" la finestra di errore non si manifesta, però appena lancio da web "windows update" riappare l'errore e si cambia da "arrestato" ad "avviato" il servizio.
Spero che per Voi più esperti di me quaest o può dire qualcosa. Per il momento la scio il servzio "arrestato.
Ciao e ancora grazie per i suggerimenti ricevuti e per quelli che riceverò.
Carlodam
Utente Junior
 
Post: 25
Iscritto il: 08/03/09 13:07

Re: Si è verificato un errore wuauclt

Postdi quizface » 16/03/09 09:42

Dai un occhiata qui' http://www.kellys-korner-xp.com/xp_w.htm#xp_update in particolare
Can't download any updates and/or you receive an error message:

Go to Start/Run and type in: regsvr32 wintrust.dll. If that doesn't help: Go to Start/Run and type in CMD. At the command prompt, type the following commands, pressing ENTER after each line:

net stop cryptsvc
ren %systemroot%\system32\catroot2 oldcatroot2
net start cryptsvc
Se non siete sicuri di quello che scrivete, non scrivete niente, nessuno vi obbliga ed eviterete di confondere chi gia' e' confuso. Ciao..ciao
Avatar utente
quizface
Utente Senior
 
Post: 15071
Iscritto il: 03/10/04 00:36

Re: Si è verificato un errore wuauclt

Postdi Carlodam » 16/03/09 20:16

quizface ha scritto:Dai un occhiata qui' http://www.kellys-korner-xp.com/xp_w.htm#xp_update in particolare
Can't download any updates and/or you receive an error message:

Go to Start/Run and type in: regsvr32 wintrust.dll. If that doesn't help: Go to Start/Run and type in CMD. At the command prompt, type the following commands, pressing ENTER after each line:

net stop cryptsvc
ren %systemroot%\system32\catroot2 oldcatroot2
net start cryptsvc


Ho eseguito nell'ordine:
1) START ESEGUI regsvr32 wintrust.dll Risposta: DllRegisterServer in wintrust.dll riuscito
ma il problema persiste.
2) dal prompt dei comandi:
net stop cryptsvc + invio risposta: il servizio servizi d crittografia arrestato
ren c:\windows\system32\catroot2 oldcatroot2 + invio
net start cryptsvc + invio risposta il servizio di crittografia avviato
Nonostatnte tutto il problema è ancora presente.......
Carlodam
Utente Junior
 
Post: 25
Iscritto il: 08/03/09 13:07

Re: Si è verificato un errore wuauclt

Postdi pemfabienne » 18/06/09 13:39

Io ho lo stesso problema. Ho provato a seguire tutte le istruzioni che hai dato ma continua a non funzionare. Quando inserisco nel prompt rd /S /Q DataStore mi dice "impossibile accedere al file. Il file è utilizzato da un altro processo".
Grazie
pemfabienne
Newbie
 
Post: 1
Iscritto il: 18/06/09 13:34

Precedente

Torna a Software Windows


Topic correlati a "Si è verificato un errore wuauclt":


Chi c’è in linea

Visitano il forum: Nessuno e 158 ospiti