Condividi:        

Problema doppio monitor [RISOLTO]

Per tutti i tuoi problemi Linux entra qui e risolvili!

Moderatori: Anthony47, gunter, zendune

Problema doppio monitor [RISOLTO]

Postdi hydra » 09/09/08 12:09

Salve a tutti. Ho da poco acquistato un Aquos e ierisera ho provato a collegarlo al pc. sul portatile è montata una ATI X600, la quale ha una uscita SVideo e un'uscita per il monitor. Collegando il televisore con un cavo VGA non riesco a visualizzare niente, o meglio, ci sono alcuni problemi.
Se io collego il cavo prima di accendere il pc, si vede sullo schermo, ma dopo la schermata di caricamento di Kubuntu (8.04), non visualizza più niente; non viene visualizzato niente neanche sullo schermo del pc (dall'inizio).
Se invece lo collego a pc acceso e modifico le proprietà della scheda video per abilitare l'uscita del monitor, mi fa riavviare il server X ma non visualizza niente sulla tv. Ho controllato sulle specifiche della tv e la risoluzione è supportata, quindi dovrebbe funzionare. Non riesco a capire se il problema è della scheda video o del SO. In passato, quando avevo Windows xp montato, avevo provato con un monitor crt e funzionava, quindi non dovrebbe essere un problema dell'uscita vga (anche perchè se lo collego dall'inizio si vede). Sul portatile ci sono dei tasti funzione per abilitare il monitor (come doppio monitor o come estensione del primo), se li premo il monitor del pc si disattiva come se abilitasse il monitor esterno ma inutile dire che sulla tv non vedo niente. :aaah
So che è un po' ingarbugliato ma neanch'io so spiegare bene, anche perchè non riesco a capire quale sia il problema. Non riesco neanche a cercare in rete quando sono davanti alla tv perchè per adesso non ho internet a casa. Secondo voi cosa può essere? :undecided: :neutral:
Avatar utente
hydra
Moderatore
 
Post: 7007
Iscritto il: 19/07/04 08:06
Località: Vallis Duplavis

Sponsor
 

Re: Problema doppio monitor

Postdi gunter » 09/09/08 15:02

Purtroppo (o per mia fortuna) ho una scheda grafica nvidia e quindi non so darti indicazioni specifiche, però Qui (salta a piè pari le parti riguardanti il kernel) trovi informazioni e una configurazione a cui ti puoi "ispirare". Posta il contenuto del file .Xsessionerrors (o qualcosa di simile) che trovi (file nascosto) nella tua home...
Avatar utente
gunter
Moderatore
 
Post: 3674
Iscritto il: 07/06/06 18:28
Località: Rovereto (tn)

Re: Problema doppio monitor

Postdi hydra » 10/09/08 07:25

Ecco qua:

Codice: Seleziona tutto
Xsession: X session started for hydra at mar set  9 19:40:21 CEST 2008
startkde: Starting up...
startkde: kpersonalizer not found! Please install to properly configure your user.
kbuildsycoca running...
Checking for Xgl: not present.
Found laptop using ati driver.
aborting and using fallback: /usr/bin/kwin
X Error: BadWindow (invalid Window parameter) 3
  Major opcode:  2
  Minor opcode:  0
  Resource id:  0x1800059
kwin: impossibile ottenere la manager selection, c'è un altro wm attivo? (prova ad utilizzare --replace)Ignored duplicate item: Kontact
Ignored duplicate item: KArm
Ignored duplicate item: KNotes
Ignored duplicate item: Strigi
kbuildsycoca running...
Reusing existing ksycoca
Could not find 'guidance-power-manager.py' executable.
kdecore (KProcess): WARNING: _attachPty() 14
kbuildsycoca running...
Reusing existing ksycoca
kdecore (KAction): WARNING: KAction::insertKAccel( kaccel = 0x80e19f8 ): KAccel object already contains an action name "file_quit"
kdecore (KAction): WARNING: KAction::insertKAccel( kaccel = 0x80e19f8 ): KAccel object already contains an action name "file_quit"
kio (KIOConnection): ERROR: Could not write data
kio (KIOConnection): ERROR: Could not write data
X Error: BadWindow (invalid Window parameter) 3
  Major opcode:  20
  Minor opcode:  0
  Resource id:  0x800029
X Error: BadWindow (invalid Window parameter) 3
  Major opcode:  19
  Minor opcode:  0
  Resource id:  0x800029
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
X Error: BadWindow (invalid Window parameter) 3
  Major opcode:  19
  Minor opcode:  0
  Resource id:  0x3200012
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
X Error: BadWindow (invalid Window parameter) 3
  Major opcode:  19
  Minor opcode:  0
  Resource id:  0x3200247
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 File selected (%1)" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Folder selected" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Folder selected" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Folder selected" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Folder selected" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Folder selected" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Folder selected" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Folder selected" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Folder selected" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 File selected (%1)" doesn't contain 2 different plural forms as expected
X Error: BadWindow (invalid Window parameter) 3
  Major opcode:  19
  Minor opcode:  0
  Resource id:  0x3200b3e
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 File selected (%1)" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 File selected (%1)" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 Item" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 File selected (%1)" doesn't contain 2 different plural forms as expected
d3lphin: ERROR: translation of "1 File selected (%1)" doesn't contain 2 different plural forms as expected


Spero si riesca a capire qualcosa, io vedo una marea di errori. :D

Per la guida, me la scarico e con calma la provo (come ho detto, per il momento a casa sono offline).
Avatar utente
hydra
Moderatore
 
Post: 7007
Iscritto il: 19/07/04 08:06
Località: Vallis Duplavis

Re: Problema doppio monitor

Postdi gunter » 11/09/08 09:14

...mmm...potresti postare anche il contenuto del file /var/log/Xorg.0.log (credo il nome sia uguale per tutte le distro)...
Avatar utente
gunter
Moderatore
 
Post: 3674
Iscritto il: 07/06/06 18:28
Località: Rovereto (tn)

Re: Problema doppio monitor

Postdi hydra » 11/09/08 10:44

Yep. Domani lo posto. :D
Avatar utente
hydra
Moderatore
 
Post: 7007
Iscritto il: 19/07/04 08:06
Località: Vallis Duplavis

Re: Problema doppio monitor

Postdi hydra » 12/09/08 16:22

Ecco qua. Spero possa esserti di aiuto per capire se c'è qualcosa di sbagliato (e ovviamente di riflesso essere di aiuto a me :D)
Codice: Seleziona tutto
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9.2)
Current Operating System: Linux ktop 2.6.24-19-generic #1 SMP Wed Aug 20 22:56:21 UTC 2008 i686
Build Date: 13 June 2008  01:08:21AM
 
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 12 13:41:49 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "Configured Video Device"
(**) |-->Input Device "Synaptics Touchpad"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
   Entry deleted from font path.
(==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
   Using the first core pointer device.
(==) The core keyboard device wasn't specified explicitly in the layout.
   Using the first keyboard device.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81dc500
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.3
   X.Org Video Driver: 2.0
   X.Org XInput driver : 2.0
   X.Org Server Extension : 0.3
   X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.0.0
   ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1025,0066 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2664 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1025,0066 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1025,0066 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1025,0066 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1025,0066 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1025,0066 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1025,0066 rev 04 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 1025,0066 rev 04 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1025,0066 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 1025,0066 rev 04 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1025,0066 rev 04 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,3150 card 1025,0066 rev 00 class 03,00,00 hdr 00
(II) PCI: 06:01:0: chip 104c,8031 card 1400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:01:2: chip 104c,8032 card 1025,0066 rev 00 class 0c,00,10 hdr 80
(II) PCI: 06:01:3: chip 104c,8033 card 1025,0066 rev 00 class 01,80,00 hdr 80
(II) PCI: 06:03:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00
(II) PCI: 06:08:0: chip 14e4,169c card 1025,0066 rev 03 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
   [0] -1   0   0x00003000 - 0x000030ff (0x100) IX[B]
   [1] -1   0   0x00003400 - 0x000034ff (0x100) IX[B]
   [2] -1   0   0x00003800 - 0x000038ff (0x100) IX[B]
   [3] -1   0   0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
   [0] -1   0   0xc8100000 - 0xc81fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
   [0] -1   0   0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 9: bridge is at (0:28:0), (0,9,9), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 10: bridge is at (0:28:1), (0,10,10), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:2), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 non-prefetchable memory range:
   [0] -1   0   0xc8200000 - 0xc82fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:1:0), (6,7,8), BCTRL: 0x05c0 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc M24 1P [Radeon Mobility X600] rev 0, Mem @ 0xd0000000/27, 0xc8100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
   [0] -1   0   0xc8200000 - 0xc820ffff (0x10000) MX[B]
   [1] -1   0   0xc8219000 - 0xc8219fff (0x1000) MX[B]
   [2] -1   0   0xc8214000 - 0xc8215fff (0x2000) MX[B]
   [3] -1   0   0xc8210000 - 0xc8213fff (0x4000) MX[B]
   [4] -1   0   0xc8217000 - 0xc82177ff (0x800) MX[B]
   [5] -1   0   0xc8000400 - 0xc80004ff (0x100) MX[B]
   [6] -1   0   0xc8000800 - 0xc80009ff (0x200) MX[B]
   [7] -1   0   0xc8000000 - 0xc80003ff (0x400) MX[B]
   [8] -1   0   0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
   [9] -1   0   0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
   [10] -1   0   0x000020a0 - 0x000020bf (0x20) IX[B]
   [11] -1   0   0x000018c0 - 0x000018cf (0x10) IX[B]
   [12] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [13] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [14] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [15] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [16] -1   0   0x00002000 - 0x0000207f (0x80) IX[B]
   [17] -1   0   0x00002400 - 0x000024ff (0x100) IX[B]
   [18] -1   0   0x00001880 - 0x000018bf (0x40) IX[B]
   [19] -1   0   0x00001c00 - 0x00001cff (0x100) IX[B]
   [20] -1   0   0x00001860 - 0x0000187f (0x20) IX[B]
   [21] -1   0   0x00001840 - 0x0000185f (0x20) IX[B]
   [22] -1   0   0x00001820 - 0x0000183f (0x20) IX[B]
   [23] -1   0   0x00001800 - 0x0000181f (0x20) IX[B]
   [24] -1   0   0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
   [0] -1   0   0xc8200000 - 0xc820ffff (0x10000) MX[B]
   [1] -1   0   0xc8219000 - 0xc8219fff (0x1000) MX[B]
   [2] -1   0   0xc8214000 - 0xc8215fff (0x2000) MX[B]
   [3] -1   0   0xc8210000 - 0xc8213fff (0x4000) MX[B]
   [4] -1   0   0xc8217000 - 0xc82177ff (0x800) MX[B]
   [5] -1   0   0xc8000400 - 0xc80004ff (0x100) MX[B]
   [6] -1   0   0xc8000800 - 0xc80009ff (0x200) MX[B]
   [7] -1   0   0xc8000000 - 0xc80003ff (0x400) MX[B]
   [8] -1   0   0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
   [9] -1   0   0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
   [10] -1   0   0x000020a0 - 0x000020bf (0x20) IX[B]
   [11] -1   0   0x000018c0 - 0x000018cf (0x10) IX[B]
   [12] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [13] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [14] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [15] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [16] -1   0   0x00002000 - 0x0000207f (0x80) IX[B]
   [17] -1   0   0x00002400 - 0x000024ff (0x100) IX[B]
   [18] -1   0   0x00001880 - 0x000018bf (0x40) IX[B]
   [19] -1   0   0x00001c00 - 0x00001cff (0x100) IX[B]
   [20] -1   0   0x00001860 - 0x0000187f (0x20) IX[B]
   [21] -1   0   0x00001840 - 0x0000185f (0x20) IX[B]
   [22] -1   0   0x00001820 - 0x0000183f (0x20) IX[B]
   [23] -1   0   0x00001800 - 0x0000181f (0x20) IX[B]
   [24] -1   0   0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xc8200000 - 0xc820ffff (0x10000) MX[B]
   [5] -1   0   0xc8219000 - 0xc8219fff (0x1000) MX[B]
   [6] -1   0   0xc8214000 - 0xc8215fff (0x2000) MX[B]
   [7] -1   0   0xc8210000 - 0xc8213fff (0x4000) MX[B]
   [8] -1   0   0xc8217000 - 0xc82177ff (0x800) MX[B]
   [9] -1   0   0xc8000400 - 0xc80004ff (0x100) MX[B]
   [10] -1   0   0xc8000800 - 0xc80009ff (0x200) MX[B]
   [11] -1   0   0xc8000000 - 0xc80003ff (0x400) MX[B]
   [12] -1   0   0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
   [13] -1   0   0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
   [14] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [15] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [16] -1   0   0x000020a0 - 0x000020bf (0x20) IX[B]
   [17] -1   0   0x000018c0 - 0x000018cf (0x10) IX[B]
   [18] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [19] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [20] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [21] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [22] -1   0   0x00002000 - 0x0000207f (0x80) IX[B]
   [23] -1   0   0x00002400 - 0x000024ff (0x100) IX[B]
   [24] -1   0   0x00001880 - 0x000018bf (0x40) IX[B]
   [25] -1   0   0x00001c00 - 0x00001cff (0x100) IX[B]
   [26] -1   0   0x00001860 - 0x0000187f (0x20) IX[B]
   [27] -1   0   0x00001840 - 0x0000185f (0x20) IX[B]
   [28] -1   0   0x00001820 - 0x0000183f (0x20) IX[B]
   [29] -1   0   0x00001800 - 0x0000181f (0x20) IX[B]
   [30] -1   0   0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
   compiled for 1.4.0.90, module version = 2.1.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched ati from file name ati.ids in autoconfig
(==) Matched ati for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 6.8.0
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 4.3.0
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
   compiled for 4.3.99.902, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 1.4.0, module version = 1.2.3
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
   compiled for 1.4.0, module version = 1.2.2
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets:
   ATI Radeon Mobility X600 (M24) 3150 (PCIE),
   ATI Radeon Mobility X300 (M24) 3152 (PCIE),
   ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
   ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
   ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
   ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
   ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
   ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
   ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
   ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
   ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
   ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
   ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
   ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
   ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
   ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
   ATI Radeon X800PRO (R420) JI (AGP),
   ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
   ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
   ATI Radeon Mobility 9800 (M18) JN (AGP),
   ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
   ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
   ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
   ATI Radeon Mobility M7 LW (AGP),
   ATI Mobility FireGL 7800 M7 LX (AGP),
   ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
   ATI FireGL Mobility 9000 (M9) Ld (AGP),
   ATI Radeon Mobility 9000 (M9) Lf (AGP),
   ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
   ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
   ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
   ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
   ATI Radeon 9800XT NJ (AGP),
   ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
   ATI Radeon Mobility 9600 (M10) NQ (AGP),
   ATI Radeon Mobility 9600 (M11) NR (AGP),
   ATI Radeon Mobility 9600 (M10) NS (AGP),
   ATI FireGL Mobility T2 (M10) NT (AGP),
   ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
   ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
   ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
   ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
   ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
   ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
   ATI Radeon Mobility X300 (M22) 5460 (PCIE),
   ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
   ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
   ATI Radeon X800PRO (R423) UI (PCIE),
   ATI Radeon X800LE (R423) UJ (PCIE),
   ATI Radeon X800SE (R423) UK (PCIE),
   ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
   ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
   ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
   ATI FireGL unknown (R423) UR (PCIE),
   ATI FireGL unknown (R423) UT (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility Radeon X700 XL (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon 9100 IGP (A5) 5834,
   ATI Radeon Mobility 9100 IGP (U3) 5835,
   ATI Radeon XPRESS 200 5954 (PCIE),
   ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
   ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
   ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
   ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
   ATI Radeon XPRESS 200M 5975 (PCIE),
   ATI Radeon XPRESS 200 5A41 (PCIE),
   ATI Radeon XPRESS 200M 5A42 (PCIE),
   ATI Radeon XPRESS 200 5A61 (PCIE),
   ATI Radeon XPRESS 200M 5A62 (PCIE),
   ATI Radeon X300 (RV370) 5B60 (PCIE),
   ATI Radeon X600 (RV370) 5B62 (PCIE),
   ATI Radeon X550 (RV370) 5B63 (PCIE),
   ATI Radeon X550XTX (RV370) 5657 (PCIE),
   ATI FireGL V3100 (RV370) 5B64 (PCIE),
   ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
   ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
   ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
   ATI Mobility Radeon X800 XT (M28) (PCIE),
   ATI Mobility FireGL V5100 (M28) (PCIE),
   ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
   ATI Radeon X850 XT PE (R480) (PCIE),
   ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
   ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
   ATI Radeon X850 XT (R480) (PCIE),
   ATI Radeon X800XT (R423) 5D57 (PCIE),
   ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
   ATI Radeon X700 PRO (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
   ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
   ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
   ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
   ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
   ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
   ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
   ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
   ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
   ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
   ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
   ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
   ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
   ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
   ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
   ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
   ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
   ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
   ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
   ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
   ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
   ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
   ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
   ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
   ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
   ATI Mobility Radeon X1700, ATI  Radeon X2300HD,
   ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
   ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
   ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
   ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
   ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
   ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
   ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
   ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
   ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
   ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
   ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
   ATI ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
   ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
   ATI Mobility Radeon HD 2400, ATI ATI RADEON E2400, ATI RV610,
   ATI RV670, ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
   ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
   ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
   ATI ATI Radeon HD 2600 XT AGP, ATI ATI Radeon HD 2600 Pro AGP,
   ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
   ATI Gemini ATI Mobility Radeon HD 2600 XT, ATI FireGL V5600,
   ATI FireGL V3600, ATI ATI Radeon HD 2600 LE
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility X600 (M24) 3150 (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xc8200000 - 0xc820ffff (0x10000) MX[B]
   [5] -1   0   0xc8219000 - 0xc8219fff (0x1000) MX[B]
   [6] -1   0   0xc8214000 - 0xc8215fff (0x2000) MX[B]
   [7] -1   0   0xc8210000 - 0xc8213fff (0x4000) MX[B]
   [8] -1   0   0xc8217000 - 0xc82177ff (0x800) MX[B]
   [9] -1   0   0xc8000400 - 0xc80004ff (0x100) MX[B]
   [10] -1   0   0xc8000800 - 0xc80009ff (0x200) MX[B]
   [11] -1   0   0xc8000000 - 0xc80003ff (0x400) MX[B]
   [12] -1   0   0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
   [13] -1   0   0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
   [14] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [15] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [16] -1   0   0x000020a0 - 0x000020bf (0x20) IX[B]
   [17] -1   0   0x000018c0 - 0x000018cf (0x10) IX[B]
   [18] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [19] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [20] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [21] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [22] -1   0   0x00002000 - 0x0000207f (0x80) IX[B]
   [23] -1   0   0x00002400 - 0x000024ff (0x100) IX[B]
   [24] -1   0   0x00001880 - 0x000018bf (0x40) IX[B]
   [25] -1   0   0x00001c00 - 0x00001cff (0x100) IX[B]
   [26] -1   0   0x00001860 - 0x0000187f (0x20) IX[B]
   [27] -1   0   0x00001840 - 0x0000185f (0x20) IX[B]
   [28] -1   0   0x00001820 - 0x0000183f (0x20) IX[B]
   [29] -1   0   0x00001800 - 0x0000181f (0x20) IX[B]
   [30] -1   0   0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) resource ranges after probing:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xc8200000 - 0xc820ffff (0x10000) MX[B]
   [5] -1   0   0xc8219000 - 0xc8219fff (0x1000) MX[B]
   [6] -1   0   0xc8214000 - 0xc8215fff (0x2000) MX[B]
   [7] -1   0   0xc8210000 - 0xc8213fff (0x4000) MX[B]
   [8] -1   0   0xc8217000 - 0xc82177ff (0x800) MX[B]
   [9] -1   0   0xc8000400 - 0xc80004ff (0x100) MX[B]
   [10] -1   0   0xc8000800 - 0xc80009ff (0x200) MX[B]
   [11] -1   0   0xc8000000 - 0xc80003ff (0x400) MX[B]
   [12] -1   0   0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
   [13] -1   0   0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
   [14] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [15] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [16] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [17] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [18] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [19] -1   0   0x000020a0 - 0x000020bf (0x20) IX[B]
   [20] -1   0   0x000018c0 - 0x000018cf (0x10) IX[B]
   [21] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [22] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [23] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [24] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [25] -1   0   0x00002000 - 0x0000207f (0x80) IX[B]
   [26] -1   0   0x00002400 - 0x000024ff (0x100) IX[B]
   [27] -1   0   0x00001880 - 0x000018bf (0x40) IX[B]
   [28] -1   0   0x00001c00 - 0x00001cff (0x100) IX[B]
   [29] -1   0   0x00001860 - 0x0000187f (0x20) IX[B]
   [30] -1   0   0x00001840 - 0x0000185f (0x20) IX[B]
   [31] -1   0   0x00001820 - 0x0000183f (0x20) IX[B]
   [32] -1   0   0x00001800 - 0x0000181f (0x20) IX[B]
   [33] -1   0   0x00003000 - 0x000030ff (0x100) IX[B](B)
   [34] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [35] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000c8100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
   "Default Screen" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (==) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 0.1.0
   ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.0.0
   ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility X600 (M24) 3150 (PCIE)" (ChipID = 0x3150)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.28.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 25000, sclk: 250.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000; xclk=25000
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-0x64, DACType-1, TMDSType-1, ConnectorType-3
(II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section Configured Monitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Panel ID string: AUO                     
(II) RADEON(0): Panel Size from BIOS: 1400x1050
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1400, YRes: 1050, DotClock: 108000
HBlank: 288, HOverPlus: 24, HSyncWidth: 56
VBlank: 16, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
 Monitor   -- AUTO
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- None
 DDC Type  -- 0x60
(II) RADEON(0): Port1:
 Monitor   -- AUTO
 Connector -- DVI-D
 DAC Type  -- None
 TMDS Type -- Internal
 DDC Type  -- 0x64
(II) RADEON(0): Port2:
 Monitor   -- AUTO
 Connector -- LVDS
 DAC Type  -- None
 TMDS Type -- None
 DDC Type  -- 0x0
(II) RADEON(0): Port3:
 Monitor   -- AUTO
 Connector -- STV
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- None
 DDC Type  -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Detected non-DDC Monitor Type: 2
finished output detect: 2
finished output detect: 3
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output LVDS using initial mode 1400x1050
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.2.0
   ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
   of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] 0   0   0xc8100000 - 0xc810ffff (0x10000) MX[B]
   [1] 0   0   0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
   [2] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [3] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [4] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [5] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [6] -1   0   0xc8200000 - 0xc820ffff (0x10000) MX[B]
   [7] -1   0   0xc8219000 - 0xc8219fff (0x1000) MX[B]
   [8] -1   0   0xc8214000 - 0xc8215fff (0x2000) MX[B]
   [9] -1   0   0xc8210000 - 0xc8213fff (0x4000) MX[B]
   [10] -1   0   0xc8217000 - 0xc82177ff (0x800) MX[B]
   [11] -1   0   0xc8000400 - 0xc80004ff (0x100) MX[B]
   [12] -1   0   0xc8000800 - 0xc80009ff (0x200) MX[B]
   [13] -1   0   0xc8000000 - 0xc80003ff (0x400) MX[B]
   [14] -1   0   0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
   [15] -1   0   0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
   [16] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
   [17] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
   [18] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
   [19] 0   0   0x00003000 - 0x000030ff (0x100) IX[B]
   [20] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [21] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [22] -1   0   0x000020a0 - 0x000020bf (0x20) IX[B]
   [23] -1   0   0x000018c0 - 0x000018cf (0x10) IX[B]
   [24] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [25] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [26] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [27] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [28] -1   0   0x00002000 - 0x0000207f (0x80) IX[B]
   [29] -1   0   0x00002400 - 0x000024ff (0x100) IX[B]
   [30] -1   0   0x00001880 - 0x000018bf (0x40) IX[B]
   [31] -1   0   0x00001c00 - 0x00001cff (0x100) IX[B]
   [32] -1   0   0x00001860 - 0x0000187f (0x20) IX[B]
   [33] -1   0   0x00001840 - 0x0000185f (0x20) IX[B]
   [34] -1   0   0x00001820 - 0x0000183f (0x20) IX[B]
   [35] -1   0   0x00001800 - 0x0000181f (0x20) IX[B]
   [36] -1   0   0x00003000 - 0x000030ff (0x100) IX[B](B)
   [37] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
   [38] 0   0   0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit d0000000 0 0
(==) RADEON(0): Write-combining range (0xd0000000,0x4000000)
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 2
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0):   mem_size         : 0x04000000
(II) RADEON(0):   MC_FB_LOCATION   : 0xd3ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1408,1202)
(II) RADEON(0): Largest offscreen area available: 1408 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0xd10000
(II) RADEON(0): Will use depth buffer at offset 0x1382000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x3ff8000
(II) RADEON(0): Will use 38912 kb for textures at offset 0x19f4000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 8192 kB allocated with handle 0x00000000
(II) RADEON(0): [pci] ring handle = 0xe0d38000
(II) RADEON(0): [pci] Ring mapped at 0xb7919000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xe0e39000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb7918000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xe0e3a000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xb3656000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xe103a000
(II) RADEON(0): [pci] GART Texture map mapped at 0xb3176000
(II) RADEON(0): [drm] register handle = 0xc8100000
(II) RADEON(0): [dri] Visual configs initialized
disable montype: 2
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):   MC_FB_LOCATION   : 0xd3ffd000 0x1fff0000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc1
restore pll1
restore LVDS
enable montype: 2
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
disable montype: 2
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xd3ffd000 is: 0xd3ffd000
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):   MC_FB_LOCATION   : 0xd3ffd000 0xd3ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Scanline Image Writes
   Setting up tile and stipple cache:
      32 128x128 slots
      32 256x256 slots
      16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 1202)
(II) RADEON(0): Using hardware cursor 1 (scanline 1204)
(II) RADEON(0): Largest offscreen area available: 1408 x 6983
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.0.0
   ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 370 x 277
Atom 4, CARD32 4, unsigned long 4
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event7
(**) Option "Device" "/dev/input/event7"
(**) Option "HorizEdgeScroll" "0"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(WW) Configured Mouse: No Device specified, looking for one...
(II) Configured Mouse: Setting Device option to "/dev/input/mice"
(--) Configured Mouse: Device: "/dev/input/mice"
(==) Configured Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Generic Keyboard: XkbLayout: "it"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Synaptics Touchpad)
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event7
(**) Option "Device" "/dev/input/event7"
(--) Synaptics Touchpad touchpad found
enable montype: 2
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
SetClientVersion: 0 9
enable montype: 2
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) 3rd Button detected: disabling emulate3Button
Avatar utente
hydra
Moderatore
 
Post: 7007
Iscritto il: 19/07/04 08:06
Località: Vallis Duplavis

Re: Problema doppio monitor

Postdi gunter » 12/09/08 17:24

Dall'output stai utilizzando i driver Radeon (che supportano la tua scheda) che sono open source, dalla pagina che ti ho linkato precedentemente questo è l'estratto che devi sostituire/aggiungere al tuo xorg.conf:
Codice: Seleziona tutto
Section "Device"   
    Identifier "device0"   
    VendorName "ATI"   
    BoardName "ATI Radeon"   
    Driver "radeon"   
    BusID "PCI:1:0:0"   
    Screen 0   
EndSection   
   
Section "Device"   
    Identifier "device1"   
    BoardName "ATI Radeon"   
    Driver "radeon"   
    BusID "PCI:1:0:0"
    Screen 1
EndSection

Section "Monitor"
    Identifier "monitor0"
    Option "DPMS"
EndSection

Section "Monitor"
    Identifier "monitor1"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device "device0"
    Monitor "monitor0"
    DefaultColorDepth 24
    Subsection "Display"
        Depth 24
        Virtual 1280 1024
        Modes    "1280x1024"
    EndSubsection
EndSection

Section "Screen"
    Identifier "Screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 24
    Subsection "Display"
        Depth 24
        Virtual 1280 1024
        Modes    "1280x1024"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "Multihead layout"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Screen  "Screen0" 0 0
    Screen  "Screen1" RightOf "Screen0"
EndSection

Può essere un buon inizio vedere come funziona così. Ultimamente ubuntu utilizza una sorta di programma aggiuntivo ad xorg "che si autoconfigura sul momento" e dovresti notarlo dal file di configurazione molto scarno. Francamente non so se effettivamente sia un bene soprattutto per usi particolari (come il doppio monitor), fammi sapere come va la prova.

p.s.: fai un backup del tuo attuale file
Avatar utente
gunter
Moderatore
 
Post: 3674
Iscritto il: 07/06/06 18:28
Località: Rovereto (tn)

Re: Problema doppio monitor

Postdi hydra » 29/09/08 14:19

Ciao gunter, è passato del tempo ma sono riuscito a fare qualche prova. Basandomi sul link che mi hai dato e sulla configurazione che mi hai consigliato, ho provato a modificare il file xorg.conf. Risultato: non funziona. Nel senso che non si riesce ad avviare il server X e devo entrare in safe mode per ripristinarlo. E' più o meno la stessa cosa che succede quando modifico tramite le impostazioni di sistema (K - sistema - ...), quando riavvio il server X in realtà non si avvia, parte in modalità testo e non si riesce ad avviare.

Mi sai dire come faccio a sapere se i driver sono installati correttamente? E' meglio usare i driver opensource o i driver proprietari? Poi ti butto li un altro quesito a cui puoi rispondere con calma ( :D :D :D ), come faccio a sapere se è tutto configurato correttamente? In avvio è lento perchè secondo me prova a configurare qualcosa e non ci riesce. :roll: :undecided:
Avatar utente
hydra
Moderatore
 
Post: 7007
Iscritto il: 19/07/04 08:06
Località: Vallis Duplavis

Re: Problema doppio monitor

Postdi hydra » 03/10/08 09:32

Allora, ho dato un po un'occhiata in giro. Ho installato i driver proprietari della scheda ATI e pare che il doppio monitor funzioni, almeno collegando un monitor esterno funziona. Devo provare con la tv. Ho un altro problema, non so se è collegato a questo: dopo aver installato i driver e aver abilitato Compiz (con Emerald come gestore), quando spengo o riavvio il pc si blocca con una schermata tipo desktop però tutto sfasato, tipo pop art. :D Per chiudere effettivamente devo premere Ctrl-Alt-Canc. Sapete dirmi se c'è qualcosa che posso controllare?
Avatar utente
hydra
Moderatore
 
Post: 7007
Iscritto il: 19/07/04 08:06
Località: Vallis Duplavis

Re: Problema doppio monitor

Postdi archimede » 03/10/08 09:50

Non so se il tuo problema è lo stesso che ho avuto io, ma anch'io un annetto fa ho avuto problemi a configurare il monitor aggiungito sul mio laptop.

Ho trovato la soluzione qui (da solo non ci sarei arrivando neanche piangendo turco).

Preparati perché c'è parecchio da leggere.

HTH.

Alessandro
archimede
Moderatore
 
Post: 2851
Iscritto il: 07/11/02 12:41
Località: Genova

Re: Problema doppio monitor

Postdi hydra » 03/10/08 10:10

Danchiu. :D
Spero comunque che funzioni lo stesso, altrimenti mi armerò di pazienza e mi metterò a leggere.
Avatar utente
hydra
Moderatore
 
Post: 7007
Iscritto il: 19/07/04 08:06
Località: Vallis Duplavis

Re: Problema doppio monitor

Postdi hydra » 13/10/08 07:57

Risolto il problema, installando i driver proprietari e cambiando cavo VGA. :D
Avatar utente
hydra
Moderatore
 
Post: 7007
Iscritto il: 19/07/04 08:06
Località: Vallis Duplavis


Torna a Software Linux


Topic correlati a "Problema doppio monitor [RISOLTO]":

problema blocco note
Autore: carlin
Forum: Software Windows
Risposte: 7

Chi c’è in linea

Visitano il forum: Nessuno e 26 ospiti