Condividi:        

Masterizzaore DVD: Errore in scrittura

Se il modem non funziona, hai problemi con la scheda video o non sai che processore scegliere entra qui!!

Moderatori: m.paolo, Caffey

Masterizzaore DVD: Errore in scrittura

Postdi embassy » 06/02/06 20:05

oleeeeee... nuovo problema .. fino a due giorni fa andava che era na meraviglia oggi cerco di far eun dvd su un +RW (ne ho gia provati 2) e mi da errore in scrittura nn specificato

questo è il LOG:
..
..
5C80001080000000005666878691

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9.20.56
ahead WinASPI: File 'G:\Programmi\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13.54.32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A116 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 2 - 7.0.0.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L200M0 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 5 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 5 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 6 ID 0 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 7 ID 31 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4120B E: CDRom0
SONY CD-RW CRX220E1 F: CDRom1
AXV CD/DVD-ROM H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 501MB (513332kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.2.2006
Compilation UDF/ISO
19.49.58 #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started

19.49.59 #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)

19.49.59 #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19.49.59 #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted

19.49.59 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

19.49.59 #6 Text 0 File Reader.cpp, Line 124
Reader running

19.49.59 #7 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRAM GSA-4120B running

19.49.59 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

19.49.59 #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

19.49.59 #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

19.50.00 #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286431 (508:05.56, 4465MB)

19.50.00 #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

19.50.00 #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

19.50.00 #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19.50.00 #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286432 (2286432) = #2286432/508:5.57
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286432 blocks [E: HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------

19.50.00 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682612736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286432 | lead-out | 1 | 0x41 | 0x00

19.50.01 #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19.50.01 #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

19.50.01 #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

19.50.01 #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

19.50.01 #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5.540 KB/s)

19.50.01 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19.50.01 #23 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 2373EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #.”yd...œzl...š{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h.....à.ð.......

19.50.01 #24 Text 0 File DVDR.cpp, Line 5281
Drive: HL-DT-ST DVDRAM GSA-4120B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

19.50.01 #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

19.50.35 #26 SPTI -1 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0xA0
Sense Qual: 0x80
CDB Data: 0x2A 00 00 01 02 A0 00 00 20 00 00 00
Sense Area: 0xF0 00 04 00 01 01 10 10 09 01 BB 0F A0 80
Buffer x04f70000: Len x10000
0x00 00 01 BA 44 02 64 A2 6E 17 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 97 E9 7E 97 E9 7E 97 E9 7F
0x2F BF 4B F4 BF 4B F4 BF 97 DF CB EF E5 F7 F2 FB

19.50.35 #27 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
E: HL-DT-ST DVDRAM GSA-4120B

19.50.35 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19.50.35 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

19.50.35 #30 SPTI -1039 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0xF1 00 04 00 01 01 10 10 35 01 00 0F 09 01

19.50.46 #31 SPTI -1039 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0xF1 00 04 00 01 01 A0 10 35 01 00 0F 09 01
Buffer x03832e00: Len x3c
0x00 00 00 00 00 00 00 00 05 32 21 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

19.50.46 #32 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5.540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8.53.02
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 21.59.42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

la cosa che salva all'occhio è:

Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

che nn co che significhi.. e poi
Sense Key: 0x04 (KEY_HARDWARE_ERROR)

che nn so nemmeno a che si riferisce
.... qualche aiuto plz.. ho da fare dei dvd urgenti
grazie
embassy
Utente Senior
 
Post: 682
Iscritto il: 09/12/02 16:40
Località: Sesto San Giovanni

Sponsor
 

Postdi embassy » 07/02/06 09:39

visto che la vedo grigia.. qlc sa dirmi se uno di questi due modelli ha delle controindicazioni???? quale secondo voi è il migliore??? ma sopratutto c'è qlc a + o - parità di prezzo che è considerato il migliore???

PHILIPS DVD1628K

LG DVD±RW Double Layer GSA4163B

thx
embassy
Utente Senior
 
Post: 682
Iscritto il: 09/12/02 16:40
Località: Sesto San Giovanni

Postdi quizface » 07/02/06 19:15

Apri Nero, dal menu' Masterizzatore -> Seleziona Masterizzatore -> Opzioni (in basso a sinistra) -> Impostaz. tipo di libro -> controlla di non aver scelto DVD-ROM e metti Automatico
Se non siete sicuri di quello che scrivete, non scrivete niente, nessuno vi obbliga ed eviterete di confondere chi gia' e' confuso. Ciao..ciao
Avatar utente
quizface
Utente Senior
 
Post: 15071
Iscritto il: 03/10/04 00:36

Postdi embassy » 07/02/06 21:23

gia impostato su automatico....
dite che è un problema hw??? ho un modo per "testarlo"??
embassy
Utente Senior
 
Post: 682
Iscritto il: 09/12/02 16:40
Località: Sesto San Giovanni

Postdi embassy » 09/02/06 15:18

be se nessuno ha idee.. penso che passerò all'acqisto di un nuovo mast dvd

qualche consiglio??? i due elencati sopra fanno schifo?? qualche controinndicazione?. per esperienza personjale o per sentito dire?
embassy
Utente Senior
 
Post: 682
Iscritto il: 09/12/02 16:40
Località: Sesto San Giovanni

Postdi embassy » 20/02/06 11:44

aggiungo una postilla.... dopo giorni di tentativi ... senza capirei il perchè nn funzionasse piu....
se nn arrivare a capire che fa dvd dati ma nn DVD-Video
ieri ha ripreso a msterizzare :mmmh: ... senza che facessi niente di particolare.... l'unioca cosa è che a 4X con un +rw o a 8x con un +r ... ci impiega sempre e cmq una 40ina di min :cry:

meglio di niente.. ma come mai sta rispresa inaspettata e questo tempo incredibile per fare un dvd???
embassy
Utente Senior
 
Post: 682
Iscritto il: 09/12/02 16:40
Località: Sesto San Giovanni

Postdi collacox » 20/02/06 15:19

stessa cosa capitata a me...ma con un CD audio....il CD audio non me lo faceva mi diceva un errore di scrittura...e il CD dati si...(sinceramente nn ho + provato a fare un CD da quando nn andava !)
collacox
Utente Senior
 
Post: 145
Iscritto il: 22/01/03 20:58
Località: Bellinzona (CH)

Postdi Magik » 20/02/06 15:37

non me ne parlate a me di errori di masterizzatore
il mio masterizza sino a 48x ma non lo mai spinto oltre i 16
masterizzo sempre a 12x ed a 8x non ho mai masterizzato perchè mi guastava sempre i cd
ora a 12x e alle altre non masterizza e la chiusura non avviene o si blocca prima
mentre a 8 non si blocca ma molte volte fa tutta la procedura ma alla fine quando mi esc eil cd masterizzato non ha masterizzato niente sapete dirmi il motivo?
dopo un po' di tentativi masterizza come mai?
e masterizza senza che io veda la differenza sul supporto
di solito si vede la differenza di colore dalla parte piena a quella vuota ora non si vede +
Magik
Utente Senior
 
Post: 1759
Iscritto il: 08/12/04 13:45


Torna a Assistenza Hardware


Topic correlati a "Masterizzaore DVD: Errore in scrittura":


Chi c’è in linea

Visitano il forum: Nessuno e 147 ospiti