Seguendo molti dei consigli trovati in questo forum e rivolti a persone con problemi simili ai miei ho provato a fare un sacco di cose per sistemare la situazione, tra le quali:
1) Aggiornare Nero dalla 6.6.0.8 alla 6.6.0.18
2) Cambiare molte marche di CD e DVD
3) Aggiornare firmware (solo con originale NEC)
4) Scandisk e deframmentazioni di HD
5) Controllare ed aggiornare gli ASPI
ecc...
Ho problemi soprattutto nel masterizzare DVD sia R che RW, i CD generalmente mi vengono bene, ma non è detto neanche per loro.
Ho pensato di postare un mio log, che presenta alla data verification ben 3 errori di settori differenti.
Questo log è inerente alla masterizzazione su DVD-R Samsung (4.7 Gb) di 2 Gb di files vari che avevo su HD.
Spero possiate darmi una mano perchè non so più che fare.
Non è un problema di masterizzatore perchè è il 3° che mi da problemi simili (ho avuto un Plextor 16x10x40x ed un NEC ND-3540 prima).
Ho un AMD-850 con 448Mb di RAM, credo sia sufficiente per masterizzare, soprattutto se non faccio altro durante l'operazione, no?
Pensate che il problema sia di compatibilità di Nero con il mio NEC? Se è così mi consigliate un altro software?
Grazie mille a tutti!
P.S.: Ecco il log... quasi lo dimenticavo!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9.20.56
ahead WinASPI: File 'C:\Programmi\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18.35.34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD_RW ND-4550A> Version: 1.06 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS CD-S500/A >Version: 3.3H - HA 0 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-4550A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S500/A atapi Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 6Y080L0 YAR4 ultra Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y080L0 YAR4 ultra Port 2 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-4550A F: CDRom0
ASUS CD-S500/A E: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458204kB)
Free physical memory: 89MB (91344kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.11.2005
ISO compilation
21.13.55 #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
21.13.56 #2 Text 0 File Reader.cpp, Line 127
Reader running
21.13.56 #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-4550A running
21.13.56 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
21.13.57 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
21.13.58 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1090223 (242:16.23, 2129MB)
21.13.58 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
21.13.58 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-4550A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR004
Disc Application Code: 64, Disc Physical Code: 193
21.13.58 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21.13.58 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1090224 (1090224) = #1090224/242:16.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1090224 blocks [_NEC DVD_RW ND-4550A]
--------------------------------------------------------------
21.14.13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-4550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2232778752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1090224 | lead-out | 1 | 0x41 | 0x00
21.14.13 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
21.14.38 #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
21.14.38 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
21.14.38 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2.770 KB/s)
21.14.38 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21.14.38 #17 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
21.14.38 #18 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
21.14.38 #19 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
21.14.38 #20 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21.14.45 #21 Text 0 File Cdrdrv.cpp, Line 1288
21:14:45.353 - _NEC DVD_RW ND-4550A\H0 T0 : Queue again later
21.28.54 #22 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-4550A > start writing Lead-Out at LBA 1090224 (10A2B0h), lenght 0 blocks
21.28.54 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21.28.54 #24 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 1090223
21.29.33 #25 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2x (2.770 KB/s)
21.29.33 #26 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
21.32.25 #27 SectorVerify 10 File Cdrdrv.cpp, Line 9998
Sectors from 276072 to 276073 on disc are different to source
21.32.37 #28 SectorVerify 10 File Cdrdrv.cpp, Line 9998
Sectors from 910247 to 910248 on disc are different to source
21.32.59 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21.32.59 #30 SectorVerify 10 File Cdrdrv.cpp, Line 9998
Sectors from 1002785 to 1002786 on disc are different to source
21.32.59 #31 Phase 81 File dlgbrnst.cpp, Line 1832
Data verification failed
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8.53.02
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21.59.44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
P.P.S.: Prima di masterizzare Nero mi ha chiesto se poteva togliere il multisession per aumentare la compatibilità del disco, io gli ho detto che andava bene, ma dal log mi accorgo di...
Multisession : TRUE
Ma perchè fa così??
