il problema è questo:
masterizzatore asus 32x-12x-40x
nero 5 (versione completa in abbinamento al masterizzatore)
molto spesso,
durante la scrittura di un disco, la masterizzazione fallisce.
vi copio il log:
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'D:\Programmi\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.28, size=172099 bytes, created 21/05/2001 14.35.20
Nero Version: 5.5.6.4
Recorder: <ASUS CRW-3212A> Version: 1.0 - HA 0 TA 1 - 5.5.6.4
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <ASUS CRW-3212A> Version: 1.0 - HA 0 TA 1 - 5.5.6.4
Adapter driver: <nvatabus> HA 0
Bus Type : default (0) -> ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : ASUS DVD-E616P2 nvatabus Port 0 ID 0 DMA: ?
CdRomPeripheral : ASUS CRW-3212A nvatabus Port 0 ID 1 DMA: ?
DiskPeripheral : Maxtor 6E040L0 nvatabus Port 0 ID 2 DMA: ?
DiskPeripheral : ST3120827AS nvatabus Port 1 ID 2 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 647MB (663292kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: On
Copia CD
31.3.2005
20.04.12 #1 Phase 48 File dlgbrnst.cpp, Line 1436
Analyzing CD
20.04.12 #2 CDCOPY -1 File CDCopy.cpp, Line 2456
The CD is copyrighted
20.04.19 #3 Text 0 File CDCopy.cpp, Line 2690
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 251858 251857 ( 56:00.07)
20.04.19 #4 Text 0 File CDCopy.cpp, Line 1027
Copy options: read subcode: OFF jitter correction: OFF copy on-the-fly: OFF
read ISRC/MCN: OFF ignore inv. TOC type: ON ignore audio read error: ON
source disc does not look like CD Extra
01. 0 - 251858 = 251858, data (0)
20.04.19 #5 Phase 20 File dlgbrnst.cpp, Line 1436
Reading of CD started
20.06.17 #6 CDCOPY -27 File CDCopy.cpp, Line 1420
Results of analyzing the source CD:
Track 01: Index0=00:00.00, Index1=00:02.00, End=56:00.07, Mode=TRM_DATA_MODE1, Blocksize=2048, Track config=0x00
20.06.17 #7 Phase 21 File dlgbrnst.cpp, Line 1436
Reading CD completed
20.06.17 #8 Phase 97 File dlgbrnst.cpp, Line 1436
FlextraLink activated
20.06.17 #9 Text 0 File Reader.cpp, Line 117
Reader running
20.06.17 #10 Text 0 File Writer.cpp, Line 127
Writer ASUS CRW-3212A running
20.06.17 #11 IMAGEGEN -10 File ImageGen.cpp, Line 354
Image was written as DAO.
DAOI:
MediaCatalogNumber=''
TocType=0x00
Finalized=0x01
FirstTrack=0x01
LastTrack=0x01
ISRC=''
Blocksize=2048:
TrackMode='TRM_DATA_MODE1'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=307200 NextTrackFilePos=516112384
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=55:58.08 ( 251858)
20.06.17 #12 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (original item values)
0: TRM_DATA_MODE1 (CD-ROM Modo1)
2 indices, index0 (150) provided
original CD pos #0 + 251858 (251858) = #251858/55:58.8
relocatable, CD pos for caching/writing not required/not required, patch infos
--------------------------------------------------------------
20.07.26 #13 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 251860 (56:00.10)
20.07.27 #14 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder: ASUS CRW-3212A;
CDR code: 00 97 26 11; OSJ entry from: POSTECH Corporation
ATIP Data:
Special Info [hex] 1: F0 00 B8, 2: 61 1A 0B (LI 97:26.11), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
20.07.27 #15 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder ASUS CRW-3212A for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 516112384
20.07.27 #16 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CD-ROM Modo1)
2 indices, index0 (150) provided
original CD pos #0 + 251858 (251858) = #251858/55:58.8
relocatable, CD pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 251858 blocks [ASUS CRW-3212A ]
--------------------------------------------------------------
20.07.27 #17 Phase 24 File dlgbrnst.cpp, Line 1436
Caching of files started
20.07.29 #18 Phase 25 File dlgbrnst.cpp, Line 1436
Caching of files completed
20.07.29 #19 Phase 36 File dlgbrnst.cpp, Line 1436
Burn process started at 32x (4.800 KB/s)
20.07.29 #20 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, no CD pos, patch infos, orig at #0): write at #0
20.07.29 #21 Text 0 File Mmc.cpp, Line 14709
Set BUFE: FlextraLink -> ON
20.08.03 #22 SCSI -1024 File Cdrdrv.cpp, Line 1407
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0207E120
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x45 0xA1 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
20.08.03 #23 mmc -1024 File Writer.cpp, Line 321
Communication failure
20.08.03 #24 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
20.08.03 #25 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
20.08.15 #26 Phase 38 File dlgbrnst.cpp, Line 1436
Burn process failed at 32x (4.800 KB/s)
20.08.15 #27 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
per ora ho solo provato a disinstallare e reinstallare nero...
ma da quel poco che riesco ad intuire sembrerebbe un problema hardware, giusto?
cosa mi suggerite di fare per diagnosticare il problema ed eventualmente risolverlo? pendo dalle vostre labbra e non ho agito in nessun modo proprio per conoscere prima il vostro parere
grazie mille a tutti!