Condividi:        

"DRIVER_IRQL_NOT_LESS_OR_EQUAL (0xD1)" Stop error

Hai problemi con i file Zip, vuoi formattare l'HD, non sai come funziona FireFox? O magari ti serve proprio quel programmino di cui non ricordi il nome! Ecco il forum dove poter risolvere i tuoi problemi.

Moderatori: Dylan666, hydra, gahan

"DRIVER_IRQL_NOT_LESS_OR_EQUAL (0xD1)" Stop error

Postdi savio » 03/12/04 17:03

Questo è il mio problema:
"DRIVER_IRQL_NOT_LESS_OR_EQUAL (0xD1)" Stop error occurs in Windows Server 2003 when you remove a USB device

e a questo indirizzo la microsoft dice:

SINTOMI
A Microsoft Windows Server 2003-based computer may stop responding, and you may receive a "DRIVER_IRQL_NOT_LESS_OR_EQUAL (0xD1)" Stop error. This error may occur only when you repeatedly perform a surprise removal of a USB device.
CAUSE
This problem occurs because of a code defect in the USB controller port driver (Usbport.sys).
SOLUZIONE
Hotfix information
A supported hotfix is now available from Microsoft, but it is only intended to correct the problem that is described in this article. Only apply it to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Windows Server 2003 service pack that contains this hotfix.

To resolve this problem immediately, contact Microsoft Product Support Services to obtain the hotfix. For a complete list of Microsoft Product Support Services phone numbers and information about support costs, visit the following Microsoft Web site:
http://support.microsoft.com/default.aspx?scid=fh;[LN];CNTACTMS
Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Microsoft Support Professional determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

CHE DEBBO FARE?
savio
Utente Junior
 
Post: 78
Iscritto il: 25/11/04 12:00
Località: Barletta

Sponsor
 

Postdi Dylan666 » 03/12/04 17:11

Devi contattare il servizio tecnico per farti mandare il file Usbport.sys.
Ma tu hai Windows Server 2003 e ti compare sempre e solo quell'errore?
E ti accade quanto stacchi un apparecchio USB vero?
Avatar utente
Dylan666
Moderatore
 
Post: 39988
Iscritto il: 18/11/03 16:46

Postdi savio » 03/12/04 18:19

oops..
NO il mio è xp pro sp2 !
però il problema è la porta USB!
savio
Utente Junior
 
Post: 78
Iscritto il: 25/11/04 12:00
Località: Barletta

Postdi dado » 03/12/04 18:22

Se il problema deriva dalle USB, puoi provare a:
- reinstallare i driver della scheda madre, magari quelli aggiornati presenti sul sito del produttore della stessa (se non sai marca e modello della scheda madre, puoi usare un programma come aida32 o everest, scaricabile dalla nostra sezione download);
- se la scheda madre ha chipset VIA (lo capisci sempre usando uno dei 2 programmi su citati), aggiorna/installa i driver VIA4IN1 che scarichi dal sito http://www.viaarena.com

House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi

Postdi Dylan666 » 03/12/04 18:22

Ma il messaggio d'errore è quello? ESATTAMENTE quello?
Avatar utente
Dylan666
Moderatore
 
Post: 39988
Iscritto il: 18/11/03 16:46

Postdi savio » 03/12/04 19:12

il messagio di errore è:
in alto: DRIVER_IRQL_NOT_LESS_OR_EQUAL

in basso:
STOP. 0X000000d1 (0XF81F6328, 0X00000002, 0X00000000,0XF81F6328
USBPORT.SYS - ADDRESS F81F6328BXSE AT F81D8000 DATE STAMP 41107D62


Ma il bello che non mi esce sistematicamente, ma a volte!
Mi è capitato x esempio cliccando una sola volta su "rimozione sicura dell'hardware" tra i programmi in background
altr evolt emi capita spegnendolo!

le mie periferiche USB sono il modem e un HD!
savio
Utente Junior
 
Post: 78
Iscritto il: 25/11/04 12:00
Località: Barletta

Postdi savio » 03/12/04 19:34

Questa è la pagina da done dovrei scaricare i driver di aggiornamento dell ascheda madere
http://www.asrock.com/support/Download/dl_p4vt8%2B.htm

Non so quale e inoltre non penso sia necessari, visto che il PC l'ho comprato da appena 2 mesi!

X dado lascheda madre ha chipset VIA, ma che sono e a che serve aggoirnarli?
savio
Utente Junior
 
Post: 78
Iscritto il: 25/11/04 12:00
Località: Barletta

Postdi dado » 04/12/04 00:40

Sono driver creati x i chipset VIA montati sulle schede madri. Il chipset dirla in maniera molto semplicistica controlla quanto si monta sulla scheda e le varie porte... quindi anche quelle usb. Aggiornando o installando questi driver si migliorano le prestazioni o magari si risolvono anche problemi.

House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi

Postdi savio » 04/12/04 09:10

Ok1
Però quando io seleziono il driver per la porta USB
Mi da due soluzioni :
USB 1.0 (VIA 3038 Host controller x esempio)
USB 2.0 (VT6202, VT6241)

Naturalmente a me interessa la 2.0 però il mio chipset è
VIA VT8763 Apollo PT800
e quindi penso che l'aggiornameto disponibil esi x i chipset più vecchi!

Mi sbaglio?
savio
Utente Junior
 
Post: 78
Iscritto il: 25/11/04 12:00
Località: Barletta

Postdi dado » 04/12/04 13:15

Appunto, quelli che devi scaricare sono i VIA4IN1, non quelli specifici solo x alcuni chipset x le usb...

House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi

Postdi savio » 05/12/04 10:59

Ok! quindi sei andato nella sezione Chipset or platform driver

sinceramente questo agg. lo havevo già scaricato ma non iisrtallato xchè pensavo non centrasse niente con la USB!

Ok la istallo e provo!
savio
Utente Junior
 
Post: 78
Iscritto il: 25/11/04 12:00
Località: Barletta

Postdi savio » 08/12/04 10:41

Niente! continu aad uscire la scermata blu quando spengo il PC
Naturalmente questo non accade se prima sollego l'HD esterno
savio
Utente Junior
 
Post: 78
Iscritto il: 25/11/04 12:00
Località: Barletta

Postdi savio » 18/12/04 10:53

Può essere che non vi è compatibilità con la mia periferica USB (Archos)
Però non dovrebbe funionare in assoluto!
No?
savio
Utente Junior
 
Post: 78
Iscritto il: 25/11/04 12:00
Località: Barletta

Postdi Dylan666 » 18/12/04 14:26

Guarda se è utile, non l'ho letto tutto:
http://www.ntcompatible.com/thread27803-1.html
Avatar utente
Dylan666
Moderatore
 
Post: 39988
Iscritto il: 18/11/03 16:46

Postdi savio » 20/12/04 16:50

Questo potrebbe essere interessante:

To stop getting IRQL_NOT_LESS_OR_EQUAL error:
Check connection of IDE drives to the cable - master drive MUST be connected to the end of cable and slave - to the middle connector. If you have DVD writer, it should be at second IDE, and if it's not alone there it should be slave.
If your drives are connected other way - wait for IRQL_NOT...
It's a rule, it'simple, but it works!

Però ho bisogno di assistenza! Posso verificare la correttezza tramite software (es. aida32)? O devo aprire il PC?
savio
Utente Junior
 
Post: 78
Iscritto il: 25/11/04 12:00
Località: Barletta


Torna a Software Windows


Topic correlati a ""DRIVER_IRQL_NOT_LESS_OR_EQUAL (0xD1)" Stop error":


Chi c’è in linea

Visitano il forum: Nessuno e 66 ospiti