Condividi:        

Problemi con Nero Vision

Hai problemi con i file Zip, vuoi formattare l'HD, non sai come funziona FireFox? O magari ti serve proprio quel programmino di cui non ricordi il nome! Ecco il forum dove poter risolvere i tuoi problemi.

Moderatori: Dylan666, hydra, gahan

Postdi christazio » 10/11/04 14:42

stavolta nel log non ci sono errori...comunque stasera cerco di postarlo
christazio
Utente Junior
 
Post: 46
Iscritto il: 27/10/04 11:12

Sponsor
 

Postdi Dylan666 » 10/11/04 15:02

Se non ci sono errori è inutile. Piuttosto guarda se accade con qualunque filmato
Avatar utente
Dylan666
Moderatore
 
Post: 39988
Iscritto il: 18/11/03 16:46

Postdi christazio » 10/11/04 15:06

non mi da errori nel file log...però allafine il programma mi dice che non può chiudere il dvd

il mio album è solo fotografico niente filmati
christazio
Utente Junior
 
Post: 46
Iscritto il: 27/10/04 11:12

Postdi Dylan666 » 10/11/04 15:12

Posso solo ipotizzare problemi di grandezza... ma di solito avvisa prima.. mah!
Avatar utente
Dylan666
Moderatore
 
Post: 39988
Iscritto il: 18/11/03 16:46

Postdi christazio » 10/11/04 15:15

no è da 4gb il dvd e il mio lavoro è di 1.5 gb
christazio
Utente Junior
 
Post: 46
Iscritto il: 27/10/04 11:12

Postdi christazio » 11/11/04 09:37

ok sono riuscito a fare l'immagine su HD!!! :P :P

ma ora sorge il problema del masterizzare...se provo mi subito errore e questo log....

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'E:\Programmi\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16.51.12
Nero version: 6.6.0.1
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.06 - HA 0 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-1300A >Version: 1.06 - HA 0 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 0 ID 0 DMA: On
DiskPeripheral : IBM-DTTA-351010 atapi Port 0 ID 1 DMA: On
DiskPeripheral : SAMSUNG SP1203N TL10 ultra Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y080L0 YAR4 ultra Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392672kB)
Free physical memory: 189MB (193600kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.11.2004
Burn DVD Image
9.34.34 #1 Text 0 File Reader.cpp, Line 127
Reader running

9.34.34 #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1806479360
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x61 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x61 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=195:58.70 ( 881920)
MTYP: Mediumtype = (0x4305E)
Image file name: <E:\dvd\cd_dmc.nrg>

9.34.34 #3 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once/96, using media

9.34.35 #4 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 881919 (195:58.69, 1722MB)

9.34.35 #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

9.34.35 #6 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: Dvsn -
Disc Application Code: 64, Disc Physical Code: 193

9.34.35 #7 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9.34.35 #8 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 881920 (881920) = #881920/195:58.70
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 881920 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------

9.34.35 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1806172160, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
881920 | lead-out | 1 | 0x00 | 0x41

9.34.35 #10 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

9.34.35 #11 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

9.34.35 #12 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

9.34.35 #13 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 1x (1.385 KB/s)

9.34.35 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

9.34.35 #15 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 22:38,380 (1358380ms) -> OK

9.34.35 #16 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode for Multisession

9.34.35 #17 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

9.34.35 #18 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

9.34.35 #19 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9.34.35 #20 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x0D 0x75 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

9.34.35 #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc

9.34.35 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

9.34.35 #23 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

9.34.35 #24 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 1x (1.385 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 31/08/2001 12.00.00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Uso DVDFortis
DVD-rom nec
christazio
Utente Junior
 
Post: 46
Iscritto il: 27/10/04 11:12

Postdi Dylan666 » 11/11/04 12:12

Veramente io di errori in questo log non ne vedo... Ma si sicuro che il tuo masterrizzatore sia supportato dal Nero? Mi sta sorgendo questo dubbio anche se è improbabile sia qui il problema...
Avatar utente
Dylan666
Moderatore
 
Post: 39988
Iscritto il: 18/11/03 16:46

Postdi christazio » 11/11/04 12:16

il fatto che il problema me lo da se uso i dvd (varie marche) con i cdrom normali nessun problema
christazio
Utente Junior
 
Post: 46
Iscritto il: 27/10/04 11:12

Postdi Dylan666 » 11/11/04 12:24

Rileggendo il log noto un problema di "illegal disc".

Cerca pagine come questa:
http://forums.afterdawn.com/thread_view.cfm/118481
Avatar utente
Dylan666
Moderatore
 
Post: 39988
Iscritto il: 18/11/03 16:46

Postdi christazio » 11/11/04 12:52

dici di aggiornare il firmware? mi sembra di averlo scaricato ma non me lo riconosceva...(firmware) NEC DVD RW ND-1300A
christazio
Utente Junior
 
Post: 46
Iscritto il: 27/10/04 11:12

Postdi christazio » 11/11/04 12:53

ho trovato questo...che dici?

http://etna.rpc1.org/nec
christazio
Utente Junior
 
Post: 46
Iscritto il: 27/10/04 11:12

Postdi Dylan666 » 11/11/04 12:59

Strano che non te lo riconsoca se è il suo...

http://support.necsam.com/OEM/downloads/FlashFirmware/
Avatar utente
Dylan666
Moderatore
 
Post: 39988
Iscritto il: 18/11/03 16:46

Postdi Dylan666 » 11/11/04 13:01

christazio ha scritto:ho trovato questo...che dici?

http://etna.rpc1.org/nec


Dico che non un masterizzatore che non funziona se cominciamo a mettere pure i driver NON ufficiali è la fine...
Avatar utente
Dylan666
Moderatore
 
Post: 39988
Iscritto il: 18/11/03 16:46

Postdi christazio » 11/11/04 15:11

Vorrei ringraziarti immensamente!!!! :P :P :P ci sono riuscito ho il mio dvd photo album!!!

aggiornato il firmware e tutto ok :P

grazie mille ancora per la pazienza e la disponibilità!!!!
christazio
Utente Junior
 
Post: 46
Iscritto il: 27/10/04 11:12

Postdi Dylan666 » 11/11/04 15:17

Prego, sono contento che alla fine tutto si sia risolto. Buona visione del DVD a te e alla tua morosa! :)
Avatar utente
Dylan666
Moderatore
 
Post: 39988
Iscritto il: 18/11/03 16:46

Postdi christazio » 11/11/04 15:23

grazie ancora :P
christazio
Utente Junior
 
Post: 46
Iscritto il: 27/10/04 11:12

Precedente

Torna a Software Windows


Topic correlati a "Problemi con Nero Vision":


Chi c’è in linea

Visitano il forum: Nessuno e 74 ospiti