Condividi:        

aiuto x favore ... Codice errore 100000ea.....

Hai problemi con i file Zip, vuoi formattare l'HD, non sai come funziona FireFox? O magari ti serve proprio quel programmino di cui non ricordi il nome! Ecco il forum dove poter risolvere i tuoi problemi.

Moderatori: Dylan666, hydra, gahan

aiuto x favore ... Codice errore 100000ea.....

Postdi <=:Go!-!aN:=> » 29/02/04 01:52

:evil: è qsi una settimana che combatto con qsto errore

Tipo evento: Errore
Origine evento: System Error
Categoria evento: (102)
ID evento: 1003
Data: 29/02/2004
Ora: 1.23.59
Utente: N/D
Computer: *****
Descrizione:
Codice errore 100000ea, parametro1 fe87dda8, parametro2 81ea8120, parametro3 ff3d3ce8, parametro4 00000001.

Per ulteriori informazioni, consultare la Guida in linea e supporto tecnico all'indirizzo http://go.microsoft.com/fwlink/events.asp.
Dati:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 65 100000e
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 66 65 eters fe
0030: 38 37 64 64 61 38 2c 20 87dda8,
0038: 38 31 65 61 38 31 32 30 81ea8120
0040: 2c 20 66 66 33 64 33 63 , ff3d3c
0048: 65 38 2c 20 30 30 30 30 e8, 0000
0050: 30 30 30 31 0001

Il computer è stato riavviato da un controllo errori. Il controllo errori era: 0x100000ea (0xfe87dda8, 0x81ea8120, 0xff3d3ce8, 0x00000001).
da quello che ho capito dipende dalla skeda video ( ho un'ATI 9500 pro con i drivers catalyst 4.2 ) appena lancio un gioko dopo 2 min o meno
il pc va in stallo e si riavvia.
ho provato anke a formattare ma nulla di risolto .. ora mi kiedo potrebbe essere un problema hardware ?? :aaah
<=:Go!-!aN:=>
Newbie
 
Post: 3
Iscritto il: 29/02/04 01:30

Sponsor
 

Postdi dado » 29/02/04 12:36

I driver della scheda video sono gli ultimi disponibili?
Come directX cosa hai installato?
E probabilmente un problema proprio della scheda video e di conflitti con il sistema o altre periferiche...
Se i driver installati sono gli ultimi, ti consiglio di scaricare magari la versione precedente che magari è più stabile e più testata...

House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi

Postdi <=:Go!-!aN:=> » 01/03/04 00:29

si i drivers sono i 4.2 ho riprovato anke con i + vekki le directx sono le 9b
cmq il problema c'è anche con il computer appena formattato !! :aaah
il fatto curioso che (oltre quello che ho incollato nella precedente richiesta )nel visualizzatore eventi non c sono errori !!!
e come se appena la skeda viene messa un po + sotto sforzo vada in tilt !!
<=:Go!-!aN:=>
Newbie
 
Post: 3
Iscritto il: 29/02/04 01:30

Postdi Sergio1983 » 01/03/04 00:35

Potrebbe essere un problema hardware: magari la scheda video ha un chip di memoria danneggiato, o semplicemente scalda troppo, o riceve una tensione di alimentazione inferiore a quella di norma. Potresti provare con un programma di controllo delle temperature, ed eventualmente testare la scheda incriminata su un altro PC.
E' meglio aver amato e perduto, piuttosto che non aver amato mai. (A. Tennyson)
Sergio1983
Utente Senior
 
Post: 2584
Iscritto il: 09/10/03 13:47
Località: Basso Piemonte

Postdi dado » 01/03/04 11:57

Altra cosa: prova a fare il downgrade delle directX magari alla versione 9 semplice o alla 8.1. Puo' darsi che la 9b sia ancora in fase prematura e non sia molto simpatica alla tua scheda video.

House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi

Postdi dado » 01/03/04 12:01


House: "Vede, tutti pensano che sia un paziente a causa del bastone"
Wilson: "Allora perchè non indossa un camice bianco come tutti noi?"
House: "Perchè altrimenti pensano che sia un medico".
Avatar utente
dado
Utente Senior
 
Post: 16208
Iscritto il: 21/08/01 01:00
Località: La Città dei Sette Assedi

Postdi kadosh » 01/03/04 15:44

Non potrebbe.....E' un problema HW quello che ti si presenta, è palese sia da quello che succede che dai codici che ti da, basta cercare in giro ;)

Molto probabilmente o qualche parte HW è partita, oppure ci sono dei Bugs nei device drivers oppure ancora esiste un'incompatibilità HW tra i pezzi. Hai installato qualcosa di recente, sia sw che hw?

Le soluzioni sono molte, faccio prima a copiarti tutto quel che ho trovato...in inglese...lì dentro c'è tutto quel che ti serve per farlo tornare nuovo. Personalmente controllerei anche la situazione Patch e aggiornamenti del S.O., che peraltro non ci hai detto, poi farei quel che ti incollo:

A troubleshooting approach from a newsgroup post: "Boot from CD to start the Recovery Console, then read setuplog.txt, and setupapi.log, to see what happens when it boots.

Another newsgroup posts suggests that this error requires the debugger to look at the parameters of the error. Usually this is some hardware driver failure. Running 'verifier' may identify it. Article Q244617 - How to Use Driver Verifier to Troubleshoot Device Drivers in Windows 2000 may help."

Error code 0000000a = "IRQL_NOT_LESS_OR_EQUAL" - The error that generates this bug check usually occurs after the installation of a faulty device driver, system service, or BIOS. For additional details see the link to error code 0x0000000a.

Error code 00000020 = "KERNEL_APC_PENDING_DURING_EXIT" - May indicate a bug in a device driver. For additional details see the link to error code 0x00000020.

Error code 00000050 = "PAGE_FAULT_IN_NONPAGED_AREA" - See the link to error code 00000050 for information about what may cause this.

Error code 0000009c = "MACHINE_CHECK_EXCEPTION" - This indicates that a fatal machine check exception has occurred. See also Q162363 and error code 0x0000009c.

Error code 000000ce = "DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS" - This indicates that a driver failed to cancel pending operations before unloading. If the driver responsible for the error can be identified, its name is printed on the blue screen.

Error code 000000ea = "THREAD_STUCK_IN_DEVICE_DRIVER" - A device driver is spinning in an infinite loop, most likely waiting for hardware to become idle. This usually indicates problem with the hardware itself, or with the device driver programming the hardware incorrectly. In many cases this is the result of a bad video card or a bad display driver.

Error code 1000007f = "UNEXPECTED_KERNEL_MODE_TRAP_M" - The first parameter displayed on the blue screen specifies the trap number. Trap number 0x00000000, or Divide by Zero Error, may indicate memory corruption. Other hardware problems, or software failures can cause this error. See the the link to Bug Check codes for more explanations about various trap numbers.

Error code 1000008e = "KERNEL_MODE_EXCEPTION_NOT_HANDLED_M" - Most of newsgroup comments about this error point to faulty hardware or drivers. The hardware varies from modems, video cards, USB device to memory or sound cards. Sometimes it proves to be hardware that it is not compatible with Windows XP. Q310740 gives an example of this error occuring when and old Audigy sound card driver is installed.

Error code 100000be = "ATTEMPTED_WRITE_TO_READONLY_MEMORY" - This is issued if a driver attempts to write to a read-only memory segment. If the driver responsible for the error can be identified, its name is printed on the blue screen. A faulty device driver would typically be the cause of that. Also, potential file corruption.

Error code 100000ea = "THREAD_STUCK_IN_DEVICE_DRIVER_M" - This indicates that a thread in a device driver is endlessly spinning. See the information for 000000ea.

Error code 0000007F = "UNEXPECTED_KERNEL_MODE_TRAP" - From a newsgroup post: "According to Q104292, there are two known causes for this error:
- corrupt system files, especially file system files
- mismatched memory or motherboard problem
This error generally occurs during boot, with no parameters specified except the first one. Suggested troubleshooting is to run repair to check for corrupt files, then low-level hardware diagnostics (including diagnosing RAM and the motherboard)." See also the link to error code 0x0000007F.

Error code 0x10000050 = Some information about this type of error can be found via the error code 0x10000050 link.


Vari tipi di soluzioni di persone nel NG:


Ionut Marin (Last update 2/18/2004):
- Error code: 0x00000050 = "PAGE_FAULT_IN_NONPAGED_AREA" - See Q817197.
- Error code: 0x0000001E - See Q820767.
- Error code: 0x000000A5 - See Q831691.

Anonymous (Last update 11/10/2003):
In my case, the error occurred after installing Kingston HyperX KHX3200/512 in a P4C800 and activated performance mode in BIOS. After I disabled Performance Mode, the problem disappeared.

Christian Garbass (Last update 10/17/2003):
Error code 0000007f = "UNEXPECTED_KERNEL_MODE_TRAP" - When I remote controlled a machine with Altiris Carbon Copy 5.8.410 and tried to open a shortcut on the desktop of the controlled machine it caused the machine to hang up and to reboot.

Isd503 (Last update 9/22/2003):
Error code 0000007f = "UNEXPECTED_KERNEL_MODE_TRAP" - This error surfaced on my machine running Windows XP Professional, SP-1. I tried the suggestion of setting the virtual memory to zero and rebooting. After logon, I recreated the page file and the problem dissapeared.

Adrian Florin Moisei (Last update 5/15/2003):
Error code 000000d1 = "DRIVER_IRQL_NOT_LESS_OR_EQUAL". A faulty device driver would typically be the cause of that. See also the comments for event id 1001 from "Save Dump".

Error code 000000c2 = "BAD_POOL_CALLER" - See Q265879 link below.
Error code 00000044 = "MULTIPLE_IRP_COMPLETE_REQUESTS" - See Q196022, Q296734 and Q294876.

PaulD
Windows XP SP1 resolve this issue. See Q317277.

Birol | AKBAY
In my case, this error for a motherboard using Bus Mastering and a NIC that does not support Bus Mastering. When Bus mastering is disabled from BIOS, this type of error went away.

Anonymous
With error code 100000ea, this occured in my case due to a faulty video card.

Charlton Wang
From the net, someone mentioned setting the Virtual memory to 0 and then reboot, delete the pagefile.sys file. Then set the virtual memory back to normal. It worked for me.

Axton
Turned out to be BlackIce v2.9 causing blue screen.


Probabilmente una Hot Fix risolverà il problema...ma chi lo può dire 8)
Ch®is ˜˜ www.glgroup.it˜˜ {~Up You® Life~}™ Semper Fidelis
Avatar utente
kadosh
Moderatore
 
Post: 3791
Iscritto il: 24/09/01 01:00
Località: Roma

grazie ..

Postdi <=:Go!-!aN:=> » 02/03/04 00:14

..a tutti ragazzi vi faro' sapere qlk al + presto! ;)
<=:Go!-!aN:=>
Newbie
 
Post: 3
Iscritto il: 29/02/04 01:30


Torna a Software Windows


Topic correlati a "aiuto x favore ... Codice errore 100000ea.....":

aiuto windows 10
Autore: mod360
Forum: Software Windows
Risposte: 1

Chi c’è in linea

Visitano il forum: Nessuno e 113 ospiti