Valutazione 4.87/ 5 (100.00%) 5838 voti

Condividi:        

problema con master dvd usb2

Se il modem non funziona, hai problemi con la scheda video o non sai che processore scegliere entra qui!!

Moderatore: Caffey

problema con master dvd usb2

Postdi bobol » 26/11/05 13:32

Il problema quando parte la masterizzazione dopo qualche minuto se bloca tutto.
ho una scheda madre con porte usb1 ma ho installato una scheda pci trust usb 2 con driver aggiornati ma sempre lo stesso pb
masterizzatore e Benq EW162I
scheda madre asus TUV4X
processore intel p3 1000 mhz
ram 256
qualcuno puo aiutare Grazie
bobol
Newbie
 
Post: 4
Iscritto il: 26/11/05 13:01

Sponsor
 

Postdi quizface » 26/11/05 17:36

Che sistema operativo hai? se hai XP hai il service pack2?
In oltre i masterizzatori esterni necessitano degli ASPI driver controlla se li hai con aspichk.exe http://force_aspi_18.w.interia.pl/aspichk.exe
se non li hai installali tramite ForceASPI 1.8 http://force_aspi_18.w.interia.pl/forceaspi18.zip
Dopo aver scompattato il file lancia INSTASPI.BAT
Se non siete sicuri di quello che scrivete, non scrivete niente, nessuno vi obbliga ed eviterete di confondere chi gia' e' confuso. Ciao..ciao

Immagine
Avatar utente
quizface
Utente Senior
 
Post: 14160
Iscritto il: 03/10/04 00:36

Postdi bobol » 27/11/05 12:09

ho windows pro sp2.ho instalato aspi come ai dito ho provato amster ma niente da fare
qui il log

IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9.20.56
ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13.54.32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <BENQ DVD DD EW162I> Version: 47N9 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <BENQ DVD DD EW162I >Version: 47N9 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD EW162I E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261600kB)
Free physical memory: 100MB (102812kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.11.2005
ISO compilation
11.49.31 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11.49.32 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 39936KB of Memory

11.49.32 #3 Text 0 File Reader.cpp, Line 124
Reader running

11.49.32 #4 Text 0 File Writer.cpp, Line 113
Writer E: BENQ DVD DD EW162I running

11.49.32 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

11.49.35 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

11.49.36 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2068319 (459:37.44, 4039MB)

11.49.36 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

11.49.36 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: BENQ DVD DD EW162I, Media type: DVD+R

11.49.36 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11.49.36 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2068320 (2068320) = #2068320/459:37.45
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2068320 blocks [E: BENQ DVD DD EW162I]
--------------------------------------------------------------

11.49.36 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: BENQ DVD DD EW162I] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4235919360, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2068320 | lead-out | 1 | 0x41 | 0x00

11.49.36 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11.49.37 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

11.49.37 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

11.49.37 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

11.49.37 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2,4x (3.324 KB/s)

11.49.38 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11.49.38 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x0521b400: Len x804

11.49.38 #20 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: Current recorder setting

11.49.38 #21 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

11.50.16 #22 SPTI -600 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 80 A0 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x057e0000: Len x10000
0x4F 15 7C 34 85 5B BB A1 64 66 DD 8C 18 94 C9 CE
0xC5 73 71 72 46 BC B8 46 36 D3 D8 94 1F ED 43 C9
0x33 59 3D 68 D2 4C 83 01 26 F7 0D 47 5C FC 77 B7

11.50.16 #23 CDR -600 File Writer.cpp, Line 302
Device not available
E: BENQ DVD DD EW162I

11.50.16 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11.50.16 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11.50.16 #26 SPTI -1064 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 05 00 00 00 00 12 00 00 00 00 21 02

11.50.16 #27 CDR -1064 File WriterStatus.cpp, Line 167
Invalid block address
E: BENQ DVD DD EW162I

11.50.16 #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

11.50.17 #29 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2,4x (3.324 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8.53.02

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

grazie di aver risposto
bobol
Newbie
 
Post: 4
Iscritto il: 26/11/05 13:01

Postdi quizface » 27/11/05 17:42

Se fossi in te, toglierei Nero7 e reinstallerei Nero6 molto piu' stabile, ora alla versione 6.6.0.18
Poi i dischi in multisessione vanno fatti in Track at Once (TAO) non in Disk at Once (DAO)
Se non siete sicuri di quello che scrivete, non scrivete niente, nessuno vi obbliga ed eviterete di confondere chi gia' e' confuso. Ciao..ciao

Immagine
Avatar utente
quizface
Utente Senior
 
Post: 14160
Iscritto il: 03/10/04 00:36

Postdi bobol » 02/12/05 18:15

ho provato a masterizzare con diversi programmi niente da fare, s aggiunge adesso che l icona del dvd e sparita dal risorse del computer.il master cd funziona bene ma il dvd non.pensavo a un conflitto ma non credo. non riesco a trovare la soluzione .
ciao
bobol
Newbie
 
Post: 4
Iscritto il: 26/11/05 13:01

Postdi pro_fumo » 13/03/06 11:46

Stesso masterizzatore,stesso WINXPSP2 e stesso problema....

Alla fine ho risolto il problema (invalidando la garanzia) in questo modo :

Aperto il masterizzatore esterno
Diviso masterizzatore da parte alimentatore e connessione
Ponticellato "master" il masterizzatore invece di "cable" come era in precedenza.

Non so se tutti i masterizzatori esterni siano come questo, ma questo non è altro che un masterizzatore da PC desktop con un'alimentatore e chip di conversione (USB2->Ata)

ciaoo
pro_fumo
Newbie
 
Post: 1
Iscritto il: 13/03/06 11:38


Torna a Assistenza Hardware


Topic correlati a "problema con master dvd usb2":

Problema Windows 10
Autore: asso1998
Forum: Software Windows
Risposte: 0

Chi c’è in linea

Visitano il forum: Nessuno e 11 ospiti

cron