Valutazione 4.87/ 5 (100.00%) 5838 voti

Condividi:        

problemi improvvisi - non riesco a masterizzare più nulla

Problemi di Codec - AC3, MPEG, DivX, Xvid...? Vuoi aiuto con la tua musica? Non sai come masterizzare i tuoi mp3? In questo forum tutte le risposte alle tue domande legali!

Moderatori: axelrox, m.paolo

problemi improvvisi - non riesco a masterizzare più nulla

Postdi personalcompiuter » 02/03/08 16:04

salve a tutti da unpò di giorni ho verificato che il masterizzatore non masterizza più un bel niente... il masterizzatore è un HL-DT-ST DVDRAM GSA-T10N di un portatile asus... aveva sempre masterizzato bene ma ora di punto in bianco non masterizza più... ho provato vari software tra cui nero 7, alcohol, image burn, cdburner xp pro 3, per provare a masterizzare sia documenti che file iso... ma nulla! vi posto uno dei tanti log creati da nero spero possa essere di aiuto:

lallebu
o
5C80001080000000008666123019

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13.54.32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST DVDRAM GSA-T10N>Version: PR03 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: 
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2120BH PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-T10N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-T10N E: CDRom0
SCSIVAX DVD/CD-ROM F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096428kB)
Free physical memory: 976MB (1000432kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.3.2008
Compilation UDF/ISO
15.52.15 #1 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15.52.16 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

15.52.16 #3 Text 0 File Reader.cpp, Line 124
Reader running

15.52.16 #4 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRAM GSA-T10N running

15.52.16 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

15.52.16 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

15.52.16 #7 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

15.52.17 #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2115855 (470:11.30, 4132MB)

15.52.17 #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD DVD)

15.52.17 #10 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GSA-T10N, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

15.52.17 #11 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15.52.17 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2115856 (2115856) = #2115856/470:11.31
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2115856 blocks [E: HL-DT-ST DVDRAM GSA-T10N]
--------------------------------------------------------------

15.52.17 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: HL-DT-ST DVDRAM GSA-T10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4333273088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2115856 | lead-out | 1 | 0x41 | 0x00

15.52.17 #14 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

15.52.17 #15 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

15.52.17 #16 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

15.52.17 #17 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

15.52.17 #18 Phase 28 File dlgbrnst.cpp, Line 1724
Speed measurement started

15.52.17 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15.55.52 #20 Text 0 File WriterStatus.cpp, Line 116
<E: HL-DT-ST DVDRAM GSA-T10N> start writing Lead-Out at LBA 2115856 (204910h), length 0 blocks

15.55.52 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15.55.52 #22 Phase 29 File dlgbrnst.cpp, Line 1673
Speed measurement completed: 14,9x (20.590 KB/s)

15.55.53 #23 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 8x (11.080 KB/s)

15.55.53 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15.55.53 #25 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode for Multisession

15.55.53 #26 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

15.55.53 #27 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: No

15.55.53 #28 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15.56.25 #29 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x051c5600: Len xc

15.56.25 #30 SPTI -1064 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 2A 00 00 0C 21 02
Buffer x04f90000: Len x10000
0x01 00 02 00 86 00 01 00 63 0E F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 10 00 4E 00 75 00 6F 00
0x76 00 6F 00 00 00 00 00 00 00 00 00 00 00 00 00

15.56.25 #31 CDR -1064 File Writer.cpp, Line 302
Invalid block address
E: HL-DT-ST DVDRAM GSA-T10N

15.56.25 #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15.56.25 #33 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

15.56.26 #34 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 31

15.56.28 #35 Phase 133 File dlgbrnst.cpp, Line 1724
Writing short lead-out

15.56.28 #36 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 8x (11.080 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 04/06/2005 20.02.08 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 10/04/2006 14.00.00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)







grazie dell'aiuto!!!
"E' stata tutta colpa di quel goal a freddo!". "Guardi che avete segnato voi per primi...". "Appunto noi eravamo freddi, loro caldi e incazzeti!" (O. Canà)
Avatar utente
personalcompiuter
Utente Senior
 
Post: 174
Iscritto il: 13/02/06 11:28

Sponsor
 

Re: problemi improvvisi - non riesco a masterizzare più nulla

Postdi ptrc_000 » 03/03/08 08:29

ciao...
sicuro di non aver effettuato procedure che possano aver causato il problema???
che so...nuove installazioni,pulizie varie,eliminazione di programmi,ecc,ecc,?
comunque se vuoi..1):prova a 'disinstallare il masterizzatore.clicka sopra l'icona apri>proprietà>avanzate>disinstalla>riavvia.dovrebbe 'reinstallare' in automatico in avvio.altrimenti>impostazioni<pannello di controllo>installazione nuovo hadware>seleziona il masterizzatore>faglielo installare.
2): aggiorna il firmware.facendo 'attenzione' che sia proprio il suo.
3): controlla il cavo 'flat',(la piattina che lo collega).
4): pulisci la lente.ci sono in giro dischi appositi,nel caso non si è capaci di farlo 'manualmente...
5): facci sapere.....
Se non ottieni le risposte giuste...
accertati di aver fatto la 'giusta' domanda.
Avatar utente
ptrc_000
Utente Senior
 
Post: 128
Iscritto il: 10/02/08 17:37


Torna a Audio/Video e masterizzazione


Topic correlati a "problemi improvvisi - non riesco a masterizzare più nulla":


Chi c’è in linea

Visitano il forum: Nessuno e 2 ospiti