Condividi:        

Masterizzare DVD-R

Problemi di Codec - AC3, MPEG, DivX, Xvid...? Vuoi aiuto con la tua musica? Non sai come masterizzare i tuoi mp3? In questo forum tutte le risposte alle tue domande legali!

Moderatori: m.paolo, Anthony47, axelrox

Masterizzare DVD-R

Postdi mic86 » 05/11/07 16:05

Salve a tutti..

è possibile che una masterizzatore non riesca a masterizzare DVD+R? Ho un masterizzatore LG ( HL-DT-ST DVDRAM GSA-4165B) che mi masterizza i DVD-R ma non quelli +R..!

magari bisogna modificare qualche impostazione nel programma di masterizzazione? Uso Nero..
mic86
Utente Senior
 
Post: 119
Iscritto il: 12/02/07 10:07

Sponsor
 

Postdi mic86 » 05/11/07 16:06

il titolo del topi è sbagliato...: MASTERIZZARE DVD+R...!!
mic86
Utente Senior
 
Post: 119
Iscritto il: 12/02/07 10:07

Postdi axelrox » 05/11/07 16:14

Quel masterizzatore è in grado di scrivere i +R (dato che scrive i DL +R!).. anche perchè LG, se non erro, fosse una di quelle che supportavano i +R.
Strano.. provato a cambiare supporti e/o ad aggiornare il firmware?
axelrox
Moderatore
 
Post: 4259
Iscritto il: 11/04/07 23:19

Postdi mic86 » 05/11/07 16:21

come faccio ad aggiornare il firmware..?
mic86
Utente Senior
 
Post: 119
Iscritto il: 12/02/07 10:07

Postdi mic86 » 05/11/07 16:29

io ho provato a masterizzare un file "Immagine disco nero" con nero. Ma il programma mi dà errore di scrittura. Questo è il log:


1A25-0006-7130-1827-2429-2198

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17.33.44
Versione Nero: 6.3.1.20
Masterizzatore: <HL-DT-ST DVDRAM GSA-4165B>Versione: DL03 - HA 0 TA 0 - 6.3.1.20
Driver Adattatore: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SCSIVAX DVD/CD-ROM >Versione: 2.7a - HA 4 TA 0 - 6.3.1.20
Driver Adattatore: <Vax347s> HA 4

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4165B atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4165 D: CDRom0
SCSIVAX DVD/CD-ROM E: CDRom1
Generic DVD-ROM G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 559MB (573388kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.11.2007
Scrivi Immagine DVD
15.51.07 #1 Text 0 File Reader.cpp, Line 126
Reader running

15.51.07 #2 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4165B running

15.51.07 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 381956096
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x61 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x61 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=507:26.54 ( 2283504)
MTYP: Mediumtype = (0x4305E)
Image file name: <C:\Documents and Settings\Administrator\Documenti\La compagnia dell'anello.nrg>

15.51.07 #4 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

15.51.08 #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283503 (507:26.53, 4459MB)

15.51.08 #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

15.51.08 #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HL-DT-ST DVDRAM GSA-4165B, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

15.51.08 #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15.51.08 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2283504 (2283504) = #2283504/507:26.54
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283504 blocks [HL-DT-ST DVDRAM GSA-4165B]
--------------------------------------------------------------

15.51.08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVDRAM GSA-4165B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676616192, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2283504 | lead-out | 1 | 0x00 | 0x41

15.51.08 #11 Phase 36 File dlgbrnst.cpp, Line 1855
Inizio scrittura a 12x (16.620 KB/s)

15.51.08 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

15.51.08 #13 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

15.51.08 #14 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 4:48,908 (288908ms) -> OK

15.51.08 #15 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: No

15.51.33 #16 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x043B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00

15.51.33 #17 CDR -1135 File Writer.cpp, Line 304
Errore di scrittura

15.51.33 #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

15.51.33 #19 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

15.51.34 #20 SCSI -1135 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00

15.51.37 #21 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

15.51.37 #22 CDR -1135 File WriterStatus.cpp, Line 164
Errore di scrittura

15.51.37 #23 TRANSFER -24 File WriterStatus.cpp, Line 164
Non posso terminare la scrittura Disc At Once

15.51.37 #24 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

15.51.37 #25 Phase 38 File dlgbrnst.cpp, Line 1855
Scrittura fallita a 12x (16.620 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 30/08/2004 21.00.00 (Adapter driver for rec)
File 'Drivers\Vax347s.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 9.33.00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
mic86
Utente Senior
 
Post: 119
Iscritto il: 12/02/07 10:07


Torna a Audio/Video e masterizzazione


Topic correlati a "Masterizzare DVD-R":


Chi c’è in linea

Visitano il forum: Nessuno e 34 ospiti