Valutazione 4.87/ 5 (100.00%) 5838 voti

Condividi:        

Scrittura multisessione su Cd-RW fallita con Nero 7....?????

Problemi di Codec - AC3, MPEG, DivX, Xvid...? Vuoi aiuto con la tua musica? Non sai come masterizzare i tuoi mp3? In questo forum tutte le risposte alle tue domande legali!

Moderatori: axelrox, m.paolo

Scrittura multisessione su Cd-RW fallita con Nero 7....?????

Postdi duemme » 24/01/06 10:39

Ciao ragazzi, ho un Nec 3520a...mi va tutto a posto, ho sempre masterizzato tutto con Nero 6, da quando ho messo Nero 7 masterizza ancora tutto bene, DVD e Cd normali tranne i CD-RW in multisessione, alla fine mi dà "Indirizzo del blocco non valido", poi "Stato di scrittura non valido" e "Non è possibile eseguire fine traccia - Scrittura fallita a 48x".....qui di seguito vi copio il file log, se può essere utile.....



Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9.20.56
ahead WinASPI: File 'C:\Programmi\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12.54.32

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-3520A >Version: 1.04 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLP LM15 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3520A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261664kB)
Free physical memory: 32MB (33612kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.1.2006
CD-ROM (ISO)
10.10.55 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10.10.58 #2 Text 0 File Burncd.cpp, Line 3048
_NEC DVD_RW ND-3520A
Protezione buffer underrun attivato

10.10.58 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 39936KB of Memory

10.10.58 #4 Text 0 File Reader.cpp, Line 124
Reader running

10.10.58 #5 Text 0 File Writer.cpp, Line 113
Writer D: _NEC DVD_RW ND-3520A running

10.10.58 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10.11.02 #7 Text 0 File Burncd.cpp, Line 3342
Turn on Track-At-Once, using CD-R/RW media

10.11.05 #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 105991 ( 23:35.16)

10.11.05 #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

10.11.05 #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-3520A

10.11.05 #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10.11.05 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 ()
2 indices, index0 (150) not provided
original disc pos #0 + 105992 (105992) = #105992/23:33.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE2_2332, 2332, config 0, wanted index0 0 blocks, length 105990 blocks [D: _NEC DVD_RW ND-3520A]
--------------------------------------------------------------

10.11.05 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: _NEC DVD_RW ND-3520A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE2_2332, 2332/0x00, FilePos 0 349800 247523144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
105992 | lead-out | 1 | 0x41 | 0x00

10.11.05 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 105992 -> 105990.

10.11.25 #15 Text 0 File SCSIPassThrough.cpp, Line 58
Error on LockVolume: Accesso negato.


10.11.25 #16 Text 0 File SCSIPassThrough.cpp, Line 119
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10.11.25 #17 Text 0 File Cdrdrv.cpp, Line 9597
SPTIDismountVolume not successfull

10.11.45 #18 Text 0 File SCSIPassThrough.cpp, Line 58
Error on LockVolume: Accesso negato.


10.11.45 #19 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

10.14.36 #20 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.

10.14.37 #21 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

10.14.39 #22 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 48x (7.200 KB/s)

10.14.39 #23 SPTI -1189 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x06394c00: Len x4000

10.14.39 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10.15.33 #25 SPTI -1064 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 8C E0 00 00 1C 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x08dc0000: Len xff10
0x00 00 08 00 00 00 08 00 CF C8 28 36 46 5A 2B F6
0xE3 EA EB 46 48 19 04 3E 60 D5 90 68 23 05 D1 9C
0x82 3D C6 BE E4 DA 4F 04 0C B6 90 59 E0 96 A1 9C

10.15.34 #26 CDR -1064 File Writer.cpp, Line 302
Invalid block address
D: _NEC DVD_RW ND-3520A

10.15.34 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10.15.35 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10.15.36 #29 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
D: _NEC DVD_RW ND-3520A

10.15.36 #30 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

10.15.36 #31 Text 0 File MMC.cpp, Line 16379
<_NEC DVD_RW ND-3520A > start Close Session

10.16.01 #32 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 48x (7.200 KB/s)


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 16/06/2004 9.12.30
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 16/06/2004 9.12.30
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8.53.02

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
duemme
Utente Junior
 
Post: 20
Iscritto il: 03/10/05 09:42

Sponsor
 

Postdi duemme » 26/01/06 16:48

Ora ho provato a masterizzare alcuni DIVX con un DVD-R 8x Verbatim...niente da fare..errore di scrittura a 2x!!!!!! Ma è un problema dis ettaggi o è Nero 7 che è una ciofeca? Prima di rimettere Nero 6 reloaded vorrei un vostro parere.......questo è il LOG del DVD:

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9.20.56
ahead WinASPI: File 'C:\Programmi\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12.54.32

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-3520A >Version: 1.04 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLP LM15 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3520A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261664kB)
Free physical memory: 9MB (10128kB)
Memory in use : 96 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.1.2006
Compilation ISO
16.27.36 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

16.27.36 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 39936KB of Memory

16.27.36 #3 Text 0 File Reader.cpp, Line 124
Reader running

16.27.36 #4 Text 0 File Writer.cpp, Line 113
Writer D: _NEC DVD_RW ND-3520A running

16.27.36 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

16.27.36 #6 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media

16.27.36 #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1788559 (397:27.34, 3493MB)

16.27.36 #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

16.27.36 #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-3520A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

16.27.36 #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16.27.36 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1788560 (1788560) = #1788560/397:27.35
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1788560 blocks [D: _NEC DVD_RW ND-3520A]
--------------------------------------------------------------

16.27.36 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: _NEC DVD_RW ND-3520A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3662970880, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1788560 | lead-out | 1 | 0x41 | 0x00

16.27.56 #13 Text 0 File SCSIPassThrough.cpp, Line 58
Error on LockVolume: Accesso negato.


16.27.57 #14 Text 0 File SCSIPassThrough.cpp, Line 119
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

16.27.57 #15 Text 0 File Cdrdrv.cpp, Line 9597
SPTIDismountVolume not successfull

16.28.17 #16 Text 0 File SCSIPassThrough.cpp, Line 58
Error on LockVolume: Accesso negato.


16.28.17 #17 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

16.28.18 #18 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.

16.28.18 #19 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

16.28.18 #20 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 2x (2.770 KB/s)

16.28.18 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16.28.19 #22 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

16.28.19 #23 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

16.28.19 #24 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

16.28.19 #25 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16.28.22 #26 Text 0 File Cdrdrv.cpp, Line 1197
16:28:22.093 - D: _NEC DVD_RW ND-3520A : Queue again later

16.35.54 #27 SPTI -1093 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 08 2B 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 02
Buffer x08e60000: Len x10000
0x8F C4 BA 0F 0B FF 7A B6 E2 EB 04 72 9C 7E 07 07
0x6D 2A 03 45 E9 4B 41 91 2A 53 EF 03 08 BC 5C 6F
0xD0 5D CC BD 6F 54 E8 CF 65 3D 79 07 1E 51 E2 8E

16.35.54 #28 CDR -1093 File Writer.cpp, Line 302
No seek complete
D: _NEC DVD_RW ND-3520A

16.35.54 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

16.35.56 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

16.35.56 #31 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 535295

16.35.56 #32 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 2x (2.770 KB/s)


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 16/06/2004 9.12.30
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 16/06/2004 9.12.30
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8.53.02

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
duemme
Utente Junior
 
Post: 20
Iscritto il: 03/10/05 09:42

Postdi quizface » 26/01/06 19:16

Io ho il tuo stesso masterizzatore, ho il firnware modificato Dee's 2.U3 slow firmware ( http://liggydee.cdfreaks.com/page/3520/ ) che mi consente anche il betsetting sui DVD+, uso nero 6 e masterizzo i DivX/XviD a 8x (potrei farli anche a 12x) e non ho mai e dico mai avuto problemi.
Perche' ti ostini a farli a 2x?
Scusa vedo solo ora che hai solo 256Mb di Ram (giusto?) con libera appena 9Mb un po' pochina, non credo sia nero7, ma forse il tuo computer forse troppo sottodimensionato.
Se non siete sicuri di quello che scrivete, non scrivete niente, nessuno vi obbliga ed eviterete di confondere chi gia' e' confuso. Ciao..ciao

Immagine
Avatar utente
quizface
Utente Senior
 
Post: 14160
Iscritto il: 03/10/04 00:36

Postdi quizface » 26/01/06 19:18

quizface ha scritto:Io ho il tuo stesso masterizzatore, ho il firnware modificato Dee's 2.U3 slow firmware ( http://liggydee.cdfreaks.com/page/3520/ ) che mi consente anche il betsetting sui DVD+, uso nero 6 e masterizzo i DivX/XviD a 8x (potrei farli anche a 12x) e non ho mai e dico mai avuto problemi.
Perche' ti ostini a farli a 2x?
Scusa vedo solo ora che hai solo 256Mb di Ram (giusto?) con libera appena 9Mb un po' pochina, non credo sia nero7, ma forse il tuo computer forse troppo sottodimensionato.


Scusa la risposta non era per te :oops: :oops:
Se non siete sicuri di quello che scrivete, non scrivete niente, nessuno vi obbliga ed eviterete di confondere chi gia' e' confuso. Ciao..ciao

Immagine
Avatar utente
quizface
Utente Senior
 
Post: 14160
Iscritto il: 03/10/04 00:36


Torna a Audio/Video e masterizzazione


Topic correlati a "Scrittura multisessione su Cd-RW fallita con Nero 7....?????":


Chi c’è in linea

Visitano il forum: Nessuno e 2 ospiti

cron